Sponsored

exm

Well-Known Member
Joined
Nov 4, 2025
Threads
20
Messages
430
Reaction score
515
Location
Long Island, NY
Vehicle(s)
Mustang DH 2026, Volvo XC90 2021
The 10" Pioneer I got was 1300W, which is way too high. The SW10 you got seems rated at 600W which seems much more reasonable. I wish I got the one you bough. I bet it does sound better.
Sensitivity is also higher.
Sponsored

 

DHGOOD

Well-Known Member
Joined
Apr 19, 2025
Threads
1
Messages
77
Reaction score
90
Location
West Virginia
Vehicle(s)
2024 Mustang DH HP Premium, 2025 Mustang GT Premium, 2019 SuperDuty 6.2L 4x4
Yes, 1-7/8 with the performance connection pipes through a Corsa Resonated Double H 3' all the way out.
I was going to do a 2' setup, but my tuner advised me that the 1-7/8 would be more than enough.
I bought the same headers expected here tomorrow. I have just an H-pipe and AE - I’ll probably have to run in quiet mode. Is install a pain? Do you smell the exhaust any without the cats? Any CEL?
 

Ninjak

Posting from the Shadows
Joined
Aug 19, 2013
Threads
2
Messages
1,434
Reaction score
387
Location
The Shadows
Vehicle(s)
2024 Dark Horse 2024 Bronco Raptor 68 GTA
I bought the same headers expected here tomorrow. I have just an H-pipe and AE - I’ll probably have to run in quiet mode. Is install a pain? Do you smell the exhaust any without the cats? Any CEL?
With the setup I have, it does not drone into the vehicle; it has a low tone, and it rumbles out as the RPMs climb. In quiet mode, it is actually quiet. Normal, Sport, and Track all sound great, and you can tell the difference. That is why I purchased the resonator version; it is just the correct amount of loud.

I do not smell anything in the car. I run 93 all the time. I do not have an E85 tune.

Dropped the motor; it was all on the K-member. As you can see, I have a full road race Steeda K member. This was done because I was doing the oil pump and sprocket gears as well. Doing it this way, of course, makes getting the headers in way easier.

I had Infinite Performance of Miami do this work. No way I would tackle the OPG setup.

S650 Mustang What did you do to your S650 Mustang today?? πŸ™‹πŸ»β€β™‚οΈ 1785976573940-oc
 

Ninjak

Posting from the Shadows
Joined
Aug 19, 2013
Threads
2
Messages
1,434
Reaction score
387
Location
The Shadows
Vehicle(s)
2024 Dark Horse 2024 Bronco Raptor 68 GTA
I also did one more thing: finished up the hood pin installation. So now I have a similar setup as a GT500. I needed to get this done as I have the GT4 CF hood, and I did not want to risk it coming undone at high speed. Though the latch is stable, this added protection is necessary.
 

Pony 74

Member
Joined
Dec 9, 2025
Threads
1
Messages
9
Reaction score
1
Location
Texas
Vehicle(s)
2025 Eccoboost Premium
Swapped out the silver Mustang emblems for black emblems
Installed Ford Performance/Borla axel back black quad tip exhaust.
Had dealership install a Ford Performance calibration tune.
Swapped out the original EcoBoost premium wheels for Enkei Helix gloss wheels.
Not much else.
 
 








Top