Splitters, Diffusers, Tow Hooks, and MORE! ZL1 Addons for 2024+ Mustang is here!

[JakeLethal]

Hey, All!

ZL1 Addons recently dropped the starting line-up for the 2024 Ford Mustang S650’s, both Ecoboost and GT’s.

If you aren’t already aware, ZL1 Addons has been making a plethora of aesthetic add ons for huge selection of vehicles, including Mustang, Camaro, Challenger, Corvette.

From Splitters, Diffusers, Tow Hooks, Rock Guards, spacers, Splitter guards, Lift Pads, and even more, ZL1 Addons has a unique lineup of all sorts to fit everyone’s taste.​

MUSTANG 2024 GT/ECO STANDARD SPLITTERS

Made of 3/8" ABS black plastic
Built to order, Made in the USA!
Utilizes the 6 Factory mounting points
Matte finish with a smooth dimpled finish on the bottom.
Comes with hardware and instructions.
Not verified fitment on the Performance Pack or Dark Horse Variants​

Check out the various splitter options here!
SHOP NOW | ZL1 Add-Ons Splitters


MUSTANG 2024 GT/ECO STEALTH DIFFUSER

2 Finish Options:

Standard Aluminum - This product will have an HDPE main diffuser and fins with a raw aluminum* attachment plate.
Black Powder Coat Aluminum - This product will have an HDPE main diffuser and fins with a black powder coated aluminum attachment plate.
Designed to bolt up to the factory valance as an add-on.
Comes with an aluminum belly pan.
100% Made in the USA!

(Vehicle must have single tip exhaust with factory valance for this product to mount properly.)

Check out the various diffuser options here!
SHOP NOW | ZL1 Add-Ons Diffuser​

MUSTANG 2024 GT/ECO STANDARD ROCK GUARDS

Uses the OEM mounting locations.
Keep rocks off your body panels, side skirts and wheels.
Matte finish on both sides
Fronts are attached by using existing push pins from the factory. Rears require an additional attachment point.

Available in Front Only, Rear Only, or Combination here!
SHOP NOW | ZL1 Add-Ons Rock Guards

Check out everything ZL1 Addons for the 2024 Mustang here!
SHOP NOW | 2024 Mustang ZL1 Add-Ons

As always, if you have any questions or need some help with ZL1 Addons products, reach out with anyone of us here at Lethal Performance!​

Sponsored

 

[NightSurgeX2]

Do the rock guards fit Dark Horse? I'd be interested in a set.

 

[sdsteele2]

I installed a full set of the rock guards on my GT performance pack last Saturday.

The fronts are super easy. The rears are not too bad. You don’t drill any new holes or anything. When you install the new larger tinnerman nut, leave the other 2 screws loose and temporarily run in the new screw. Once aligned with the new screw, tighten down the others. It makes the rest of the assembly easier.

I also suggest you use some adhesion promoter where you attach the provided mount.

 

[OppoLock]

Mustang ZL1

 

[BrianJ77]

That splitter looks sick! I'm interested in those rock guards, too.

 

[93-Oct Mayne]

You planning to sell a splitter for the performance pack GTs soon?

 

[JakeLethal]

Do the rock guards fit Dark Horse? I'd be interested in a set.

So, I checked and they did say
"We are in the midst of verifying fitment on Performance Pack and the Dark Horse Models."

 

[JakeLethal]

I installed a full set of the rock guards on my GT performance pack last Saturday.

The fronts are super easy. The rears are not too bad. You don’t drill any new holes or anything. When you install the new larger tinnerman nut, leave the other 2 screws loose and temporarily run in the new screw. Once aligned with the new screw, tighten down the others. It makes the rest of the assembly easier.

I also suggest you use some adhesion promoter where you attach the provided mount.

Awesome review and tip(s), thank you!

 

[JakeLethal]

You planning to sell a splitter for the performance pack GTs soon?

Of course. We plan to carry any and everything available for the S650. Just waiting on everything to be released!

 

[NightSurgeX2]

I can't wait for some much cheaper Dark Horse HP options! Hoping you will eventually have a chin spoiler, rear spoiler + gurney flap, and fender flares as well, without having to go through OEM and paying $3,000 for those parts

 

[MustangMac67]

I love the front splitter and the rock guards. Not a big fan of the diffuser

 

[sdsteele2]

So, I checked and they did say
"We are in the midst of verifying fitment on Performance Pack and the Dark Horse Models."

Between installing the rock guards on my PP car and looking at the DH sitting at my dealer, I don’t see why they wouldn’t fit.

The wheel lips on the HP cars could be an issue, but the regular DH *should* be good to go.

Sponsored