Sponsored

Rear underbody panel missing?

System

Well-Known Member
Joined
Jul 16, 2025
Threads
2
Messages
84
Reaction score
58
Location
Western Ma
Vehicle(s)
2025 Mustang GT Convertible
Not sure of the correct term but like the panel that needs removed under the engine to change the oil... there is also one shown under the trunk area from the diff back. I never looked at this on my car until last weekend when I was installing the Diode Dynamics / Form rear reflector lights and 4th brake light. The first step in their instructions for either part is to remove this aero panel. So, I backed the car up my ramps and rolled under and nothing. I can see the locations where it would attach. This is a vehicle bought new with only a few thousand miles on it so I know it was delivered this way.

So, the question is, does every S650 come with it or are there certain options that exclude it? The one in the DD/Form video had active exhaust so that's not it. The only other two things I can think of would be mine is a convertible and mine has the performance pack. Would either of those exclude the rear underbody panel? Any other thoughts on why it's not there? I suppose it could be a random misbuild but I'm thinking it's more than likely due to another option that conflicts with its installation... TIA...
Sponsored

 
OP
OP
System

System

Well-Known Member
Joined
Jul 16, 2025
Threads
2
Messages
84
Reaction score
58
Location
Western Ma
Vehicle(s)
2025 Mustang GT Convertible
If anyone has a parts list with #'s, I'll order. Otherwise I'll be lazy and leave it as is...
 

Sig Oris

Well-Known Member
Joined
Sep 20, 2025
Threads
19
Messages
209
Reaction score
271
Location
Western Maine
Vehicle(s)
MY23 F150 PB Lariat & MY25 Mustang GT Convertible 60th #0807
If anyone has a parts list with #'s, I'll order. Otherwise I'll be lazy and leave it as is...
That was my post that was shared.

I believe I gave the “ air deflector “ part number.

you'll also need the nuts for the bumper as well as two push clips, about seven 7mm socket size screws, and one 10mm socket size bolt and part numbers unknown

I gave some guidance on cutting down

in overall content with my outcome
Sponsored

 
 








Top