19x10.5 rear, 19x9.5 front...

[Need4SpeedMotors]

What is the offset of those wheels.
Im running Rays 57DR 19x9.5 +35 squared with a 27/35/19

That color combo is nice !

Sponsored

 

[RJV15]

The square setup is looking more and more appealing to me now. I'd have to adjust camber and go with a stretched tire if I lowered the car? Perhaps I can get away with just letting it ride with the stock suspension for now.

I went squared for simplicity. I can rotate my tires, and get the full warranty from the tires (you get 50% warranty mileage in staggered setups). I think I could have gone with a 285 on the 19x9.5 wheels. Maybe next time.

Did you test fit the wheels before buying? certain 19" wheels which wouldn't clear the Brembos when I was shopping around.

 

[RJV15]

That color combo is nice !

Thanks!
I actually wanted black wheels and bronze because they were in stock lol

 

[souljer]

My set up is 19x8.5 front & 19x9.5 rear. Running Vertini bronze wheels with Continentals - front 255x40x19 rear 295x35x19

 

[RJV15]

My set up is 19x8.5 front & 19x9.5 rear. Running Vertini bronze wheels with Continentals - front 255x40x19 rear 295x35x19

295 on a 9.5?
What tire? Can you show a different angle?
Curious if I can fit a 295 on a 9.5

 

[souljer]

295 on a 9.5?
What tire? Can you show a different angle?
Curious if I can fit a 295 on a 9.5

Might be too close but here you go.

 

[RJV15]

Might be too close but here you go.

You got a side show ?
Looking to see how much that tire sticks out from the wheel.

 

[souljer]

You got a side show ?
Looking to see how much that tire sticks out from the wheel.

One of these might be better.

 

[IntoTheFold]

One of these might be better.

God bless America... that's sexy.

 

[IntoTheFold]

I went squared for simplicity. I can rotate my tires, and get the full warranty from the tires (you get 50% warranty mileage in staggered setups). I think I could have gone with a 285 on the 19x9.5 wheels. Maybe next time.

Did you test fit the wheels before buying? certain 19" wheels which wouldn't clear the Brembos when I was shopping around.

The shop didn't have the wheels in stock, unfortunately. They should be arriving in a week or so. Went to pay them a visit this morning to see if they could possibly switch me to a square setup, but the technician assured me it will fit. I trust the guy. I will just let it ride and see what happens!

 

[roket]

depends a lot more on the spoke design/thickness/profile than offset. what wheels are you getting? Ford gives the Nite Pony/Bronze Appearance Package wheels less than 5mm of space between the spokes and the Brembo calipers. when i get to work tomorrow, i will check one of the Mustangs we have with either of those packages and see what the offset of those are

the offset looks to be +42.5mm

 

[IntoTheFold]

the offset looks to be +42.5mm

I appreciate you looking into this!! Still will roll with the recommendation from the shop and see what happens. Everything could be arriving this week.

 

[IntoTheFold]

Got the wheels hooked up today. Air Lift might be out of the question, but maybe just don't air it out all the way? Maybe it will fit in that wheel well with enough camber. Technician said I could drop an inch and a half up front and an inch in the back with springs.

 

[IntoTheFold]

Another update. Went to a customs shop some ways away. Looks like maybe an Air Lift kit is still a go even with the little poke in the rear. I can get away with driving it an inch lower on bags, and I should theoretically be able to air it out all the way while parked.

 

[Discount Tire]

Got the wheels hooked up today. Air Lift might be out of the question, but maybe just don't air it out all the way? Maybe it will fit in that wheel well with enough camber. Technician said I could drop an inch and a half up front and an inch in the back with springs.

Wheels look awesome! Love the set up!

Sponsored