Search results

As @Gogoggansgo stated, everything I've heard is that they are from the GT500.

I guess I never noticed the heated seats turning themselves down in my Lincoln, and don't use them in the Mustang since it's not driven in the winter; but the Lincoln would turn them off entirely after about 90 minutes.

I can't even count how many videos I've seen of guys sending it, over correcting, having it come out the opposite direction, and then plowing into a curb/crowd/tree/light pole or rolling. There's a reason they call it 'Going full Mustang'!

Has anyone tried the Kenny Brown Performance jacking rails? They're a bit more expensive, but look like they may have actually addressed the uneven installation issue without using spacers. https://kennybrown.com/collections/2024-s650/products/jacking-rails-2015-2024-mustang-and-shelby

Nice! Glad to hear that you were able to finally get this done! I was wondering if this wouldn't be the case when I saw the change to the dash. It's unfortunate that the video hasn't been updated to reflect the change, but now we know.

I've been seeing ads for this thing popping up a lot lately. It's an extra cost, but it's supposed to take the guess work out of it. https://claytonramstead.com/products/wheel-fitment-tool

I ordered the high cowl hood and competizone front bumper cover, both in fiberglass. Will have painted to match the car.

I dont have mine yet, (shipped, but not yet received) but here are a couple of photos I received of the High Cowl.

Oh yeah! i see what you're talking about now. The dash is actually a little different than that from the video. Yours goes all the way across right above where the vents are, whereas the video and mine did not.

I have a '24 Dark Horse 600a. You still have to remove the two screws (one of which you are pointing to with your screwdriver in the first photo) holding the A/C ducting (behind the vents), and pull the duct out, to access the wire connector that the perimeter plus wiring hooks to.

Not sure what to tell you about that, aside from mine being a manual vs the car in the video being auto, the video was 100% accurate for my installation of the perimeter plus module.

Got my fingers crossed for you! Good luck!

I waited 18wks and never did receive the hood I ordered from C2. Finally just cancelled the order, got my $ back, and re-ordered from MAZ. If I had known then what I know now, I would have ordered from MAZ the first time around. Last update I got from MAZ was that it was supposed to be ready...

Nope. It does not just fit over the top, you have to remove the OEM start/stop button to put this one in. And there are, of course, 2 ways to do that. The right way, which involves removing the gauges/infotainment screen, a/c vents, and part of the center console; and the' f that shiznit' way...

Both items are from a company in the UK called 5spurs. https://5spurs.com/ford/mustang/race-horse/2024-2026/

It actually comes out in about 2s and is just held in place by the cupholders and original arm rest. So it's easy enough to just toss in the back seat should the need arise!

It's from a company in the UK called 5spurs. https://5spurs.com/2024-2029-ford-mustang-race-horse-start-button/

Replaced the Start/Stop button and added an arm rest extension.

Yikes! Sounds like they went full Australia!

Exactly! 100% correct! 30-40min might not be enough though. Bring it to me, I'll help! :crackup: