Search results

Watch the videos they have on YouTube about the car They put 4.09's in at one point but took them out

$100 for a carbon trap delete ?

https://www.steeda.com/2024-mustang-gt-drag-car?srsltid=AfmBOoq3mttk9meMuax9FNb9Z9Y0TMMN0hXfetk1SJ0dK4SzotIlKSRy

You're not going to need overdrive until well past 150mph... I'm more concerned with the spread on the way there. The old MT82/Tremec will have 30mph, 30mph, 40mph between three gears, while the new MT82D4 has a whole 40 and 50 mph between just two gears... 70-170 in the Tremec and 80-170 in...

Changing to a properly geared setup like 4.09 is a night and day difference.

These numbers are 7500rpm redline and 27" tall tire with 3.55's:

Can you put 4.09's in the rear?

I'm not paying MSRP for an American made vehicle either. Of all the new cars I have bought in my life the only one I paid MSRP for was Honda Odyssey right in the middle of COVID

https://slickdeals.net/f/19155799-prime-astroai-p10-5000a-car-battery-jump-starter-30-free-s-h?attrsrc=UserFlow%3ADealFeed%3AFor+You&src=forYou

The fact that it's winter, plus the car not being driven much, that could be normal. Did they do a compression test? That should rule out something like the engine being bad.

It made 630hp on a dynojet

Is your PCV plugged in BEFORE the air filter?

I charge mine every 3 months or so just in case The tool brand ones don't make sense to me. $200 for the jump starter, then you need to keep a $120 battery in it...

A little bit. But it's never going to sound like an old Whipple or Eaton.

The spikes are likely due to your device It shouldn't feel like it's cutting power though. I'd log air fuel ratios and fuel trims. You could have a vacuum leak somewhere. You could have a loose or damaged electrical connection. Try to record and isolate the section when you feel the problem...

How loud are you expecting it to be? The newer blowers just aren't very loud. Especially at only 10-12psi. The gears are a better design these days. And the TVS blowers like the Roush are going to be quieter than the twin screws like the Whipple (which aren't very loud either) How loud is your...

Huh?

I've used K&N filters for 25+ years and never had them get oil on my MAF. This must have gotten started by some idiot who sprayed half the bottle of oil from the cleaning kit on the filters when servicing them.

They were up 3% over last year

I keep one around. Very useful and easily starts a couple cars off one charge