Do they clear your night pony wheels without the spacers or you needed the spacers to mountI just got mine installed today, thanks sunnydhama for giving us the heads up on this product.
How do these attach to the calipers? Solid fit? How long did it take to install them?One done!
Takes longer to make sure the Brembo sticker is centered and straight than it does to install. Lol.
Excellent quality and perfect fitment!
Yeah its solid fit, time required is jacking up car + taking tires off plus 10 mins to fit and tight them on all 4 corners
anything special about the stickers you ordered?
No, just brembo stickers from amazon
Just a really important piece of advice Uncle really helped me a lot, but unfortunately, nobody was able to get a clear answer. You can run any cover on the rear without clearance issues. If you ask Aooa about the front, they say it will fit no issues, but there are many issues. I had a set of spacers laying around just in case and they 100% would not clear, and I don’t even have the Brembo 6pistons. Personally, I hate spacers and I always noticed a difference in Road vibration so I ended up painting my front brakes.
sorry to revive old thread but I’m looking to add these covers and I have the same wheels you have. Did you have to add any spacers to the front wheels to clear the covers? I installed one cover and the space between the wheel and cover is maybe 1/8”. Feels like it shouldn’t be that close.Not the sharpest picture, but the sun was low and lighting up the covers. Unless you knew the real rear Brembos should be on the front side, you’d never know.
Is it actually hitting the rim? Because it looks like it in the bottom picsorry to revive old thread but I’m looking to add these covers and I have the same wheels you have. Did you have to add any spacers to the front wheels to clear the covers? I installed one cover and the space between the wheel and cover is maybe 1/8”. Feels like it shouldn’t be that close.
It’s very close to hitting it. I’m thinking of doing some 1/4” (6mm) spacers but not sure if I should do maybe 8mm? Don’t want to have I modify anything on the wheels besides adding the small spacers.
Yeah im not sure I would put spacers on just for the caliper covers but thats just me. If you want to I would get thinest as possible as to not change the width to much. Unless your wanting to get a bit wider ect.
