Sponsored
Latest activity
-
Ninjak replied to the thread DH hits the sweet spot in my opinion.Thanks! I agree, the SC hood does look nice. The GT4 hood beyond the CF, is very breathable on the track and helps keep temps down... -
Ninjak replied to the thread DH hits the sweet spot in my opinion.I would have you go look up what a DCT is. I say again, or rather I will state it with more explanation, a DTC is an AUTOMATED MANUAL...
-
AZ_Ryan replied to the thread Black exhaust tips installed.Also something I just noticed. The factory tips aren't aligned straight. They are either canted toward the center of the car or cut at... -
-
Fruitstang replied to the thread I put Alibaba wheels on my Mustang.The problem is mostly not the machining of the parts, which results a normal buyer can visually assess, but the professional material... -
MikeyV replied to the thread DH hits the sweet spot in my opinion.A DCT shifts automatically. In what world is it not considered an automatic? That's some serious cope. -
In my opinion the DH hits the sweet spot in the S650 line up. Going DH gets you the tremic for manuals and other small upgrades that add...
-
AZ_Ryan replied to the thread Black exhaust tips installed.Received today. I just opened one and the quality looks good. It slides over the existing tip but is tight. You might need to pull the...
-
-
Fruitstang replied to the thread Radio Conversion: Sirius (NA) to DAB+ (EU).If you're willing to skip this DYI challenge and to pay a bunch of Euros, you could contact https://www.geigercars.de They import and... -
Ninjak replied to the thread I put Alibaba wheels on my Mustang.Looks good. If the quality was up to snuff when you purchased, then that is what counts. A buddy of mine bought rims for his Bronco from...
-
AZ_Ryan replied to the thread Window Tint Disaster.How so? Have you read the above posts? Not only is 70% almost clear, but its legal in most states and gives the benefit of heat and UV...
-
I had that on my old Mustang. It's not the car, it's the pump most likely. Flip the nozzle upside-down and it works fine. -
I took velgen offset Front 10" et 34 Rear 11" et52
-
Ninjak reacted to Aegean's post in the thread I have added a Trunk Spoiler on my 2024 Mustang. with
Like.
I have added a Matt Black Trunk Spoiler on my 2024 Dark Matter Gray Metallic Mustang. Very simple installation with 3M automotive... -
Ninjak replied to the thread DH hits the sweet spot in my opinion.I went with a DH because I wanted a true manual again. The DCT, believe it or not, is not automatic. Yes, it shifts like an auto, but...
-
-
I noticed that more often than not I can’t fill up my gas tank without the pump shutting off repeatedly thinking the tank is at...
-
steveo1960 replied to the thread Pumping Gas Problems.I have a similar problem. From what I have read it has something to do with how the sensitivity is set for the shutoff. What I do is...
-
I have tint completely across mine. 70% ceramic, common but illegal in my state. I believe every state allows you to install whatever...
-
MichaelKael replied to the thread Shelby Ducktail Spoiler.Talked to the manufacturer in England - distributor appears to be legit too - and got more pics too. -
-
I have tint completely across mine. 70% ceramic, common but illegal in my state. I believe every state allows you to install whatever...
-
They don’t but it’s practically transparent.
-
AZ_Ryan replied to the thread Window Tint Disaster.Some states let you do a 70% (which is nearly clear) to block heat and UV. Arizona is one.
-
AZ_Ryan reacted to rush014's post in the thread Corvette ZR1 vs. Mustang GTD Track Battle with Like.
Yep, that's a great video and Randy is the MAN!!! I wouldn't kick any of these cars out of bed for eating crackers........And...
-
AZ_Ryan replied to the thread What's your go-to post wash wax?.I agree with all that. I haven't seen much negativity personally. But yeah, you got to be realistic when using a topper. Its a great...
-
I actually arrived at Bead Maker well after it blew up and became the "it" product for a few years there. But I eventually bought a...
-
She pulled up too close to my baby and she didn't even know she touched it. The licence bracket was the culprit that did all the...
-
AZ_Ryan reacted to smurfslayer's post in the thread I must not be driving fast enough . . . . with Like.
You can simply leave it engaged and press the gas pedal to override some of the "back off". I do this all the time if I suspect a slow...
-
AZ_Ryan replied to the thread Anyone know where I can find a set of OEM s550 PP2 wheels?.I would get those. I think 10" fits better upfront (less tire poke) and these wheels are much lighter than the factory version.
-
AZ_Ryan reacted to mlauden65's post in the thread Anyone know where I can find a set of OEM s550 PP2 wheels? with Like.
LMR has 19x10 and 19x11 that might fit the bill. https://lmr.com/products/2024-mustang-sve-sp2-wheels
-
Looks like the installer used an old regular window squeegee for that and the metal part of it is what gouged your dash. They should...
-
Agreed! They refunded the tint price and covered cost of part at Ford. Service scheduled for next week but Ford thinks they might need...
-
Mod Mustang Racing posted the thread MMR Spherical Front & Rear Bushing kits & Adjustable Toe Arms For 2024+ S650 Mustang Eco, GT & DH - now available in Suspension, Steering, Chassis.The Factory 2024+ Ford Mustang features rubber bushings in the front and rear control arms that rob precious stability and seconds from... -
Mod Mustang Racing replied to the thread 2024+ Magneride Delete / Disable Modules.ttt
-
Deleted member 65426 replied to the thread Tips for photographing black cars?.This is exactly why you rotate the polarizer filter to your preference. It's not an on/off situation. You rotate the filter to remove...
-
Deleted member 65426 replied to the thread Tips for photographing black cars?.If you still don't like the images, there's an inexpensive fix. Purchase a small polarizing filter that's big enough to surround your...
-
Jeffola reacted to Manual Ronnie's post in the thread Official MOLTEN MAGENTA Mustang S650 Thread with Like.
Looks awesome! I bought some MM paint as well and going to airbrush an s650 die cast with it soon to see how it lays down -
AZ_Ryan replied to the thread Window Tint Disaster.A competent installer would have covered the dash. Im sorry that happened to you. But they need to make that right. Let us know what...
-
steveo1960 reacted to Wiley Marmot's post in the thread Read the Owners Manual Before Doing Stupid ****! with Haha.
Monday, 5/18/26, an unidentified driver drove his Tesla Cyber Truck into a lake approximately 25 miles north of the DFW Metroplex in TX...
-
OK, so if you are not into photography, I was thinking of things you could do to help, as I do admit photographing a black car is...
-
Sorry to hear about the bad service you have had. I guess I'm lucky my dealer has a foreman who only works on SVT cars and GT500's and...
-
I actually arrived at Bead Maker well after it blew up and became the "it" product for a few years there. But I eventually bought a...
-
If you attempt to fix the tint shops mistake, you will negate any liabitlity the shop may have and can claim YOU caused the scratches...
-
Jeffola replied to the thread Official MOLTEN MAGENTA Mustang S650 Thread.Well fellow 3M owners I decided to go custom color and had G2 mix me up a Molten Magenta metallic epoxy, they said it wasn't going to be...
-
-
Jeffola replied to the thread Window Tint Disaster.I had a shop remove tint from my BMW a few years ago and they damaged my rear window defroster and a door panel. I felt badly but they... -
If you attempt to fix the tint shops mistake, you will negate any liabitlity the shop may have and can claim YOU caused the scratches...
-
EgoBoost replied to the thread Florida OEM 19” GT wheels/tires/TPMS (220 miles).Ikr. They are lower cost and miles than anything on marketplace as well. No biggie tho. I’ll keep them for trade-in if I ever go that... -
EgoBoost reacted to d4rkg04t's post in the thread Florida OEM 19” GT wheels/tires/TPMS (220 miles) with Like.
Wild you haven't sold them yet. I see them go for 2x that on eBay.
-
5LTR550 reacted to agreywolfe's post in the thread Which tire size is best? 20x10/11 Wheels with Like.
HRE FF10s 20X10/11 285/35 front 315/35 rear, fitment is flush with minor poke at the bottom -
wireeater replied to the thread What's your go-to post wash wax?.TEC582. You can get a gallon for under $30 on Amazon, or wait for it to go on sale. I picked some up a few months ago for $24.99. You... -
DFB5.0 replied to the thread What's your go-to post wash wax?.I actually arrived at Bead Maker well after it blew up and became the "it" product for a few years there. But I eventually bought a... -
-
Ace reacted to Barstoolman's post in the thread Corvette ZR1 vs. Mustang GTD Track Battle with Like.
