What did you do to your S650 Mustang today?? 🙋🏻‍♂️

[Ninjak]

Is 4 ohms the right resistance?

Please report back on the result.

Yes, it is working correctly. 4ohms is the correct setting; also, it is a dual voice. This mod made a huge difference in sound; no more muddy bass. I also purchased the center speaker mentioned here; I will install it once the LT's and oil gears are completed.

The good thing about that purchase it came as a single speaker, and it was also an 8-ohm speaker, which matches the OEM speaker. You can see it is a much better speaker.

Sponsored

 

[DHGOOD]

Yesterday I installed Steeda stop the hop on my 2025 GT. Props to Steeda on parts that fit without cutting or welding or mods. Took me about an hour per side but I get distracted easily. Drove it to work today and it does indeed feel more solid/connected when I tromp it in low gear. More daily testing to come but I like i

 

[Junkyard Dog]

Jealous of your garage and lift . . .

 

[Ninjak]

Yesterday I installed Steeda stop the hop on my 2025 GT. Props to Steeda on parts that fit without cutting or welding or mods. Took me about an hour per side but I get distracted easily. Drove it to work today and it does indeed feel more solid/connected when I tromp it in low gear. More daily testing to come but I like i

The Stop the Hop kit is worth every bit of the materials it is made of. IMO, it is one of their better products.

 

[DHGOOD]

Jealous of your garage and lift . . .

Built my garage with a 12-ft ceiling to accommodate a lift and I’ve had it for 10 years now. Makes working on cars much easier. I spent my youth(and then some) on my back under cars and trucks but as I got older, the up and down wears me out.

 

[exm]

The Stop the Hop kit is worth every bit of the materials it is made of. IMO, it is one of their better products.

Going to have mine installed at the end of the month. I was told that this really great for a Mustang to have, but a necessity if you have a supercharger.

 

[DHGOOD]

And the Steeda bars give you a place to position the rear lift pads(or jack). The angle on the front of the bars sticks down below the rocker pinch so it keeps from smooshing the plastic rocker molding too.

 

[DHGOOD]

Going to be mine installed at the end of the month. I was told that this really great for a Mustang to have, but a necessity if you have a supercharger.

Yes, thats mostly why I put them on - Kooks long tube competition connect headers are next then whipple stage 2 in the fall. I hate to quit driving the car long enough to do the install!

Sponsored