Possible to add an IPMB For front camera?

[Viscosity6 5]

I was looking up front cameras on Fords and how to add them. I came across that ford adds an IPMB for cars with a front or 360 cameras.
Does anyone know or can find out if it's possible to add one from a Bronco Sport ? From what I've seen with other Fords all they needed was the oem front camera, IPMB, Wiring/ harness, and use Forscan.
They have the same looking apim(software is flashed different obviously).

Sponsored

 

[Viscosity6 5]

Looking like this may work as i look deeper.

https://www.camerasource.com/univer...plays-use-front-or-rear?q=module+wire+devices

 

[Viscosity6 5]

https://www.bronco6g.com/forum/threads/installing-front-camera-for-base.22385/

Would it be possible to do something similar to this ?

 

[Zig]

https://www.bronco6g.com/forum/threads/installing-front-camera-for-base.22385/

Would it be possible to do something similar to this ?

Does the software support it? As in, can the toggle be ticked?

 

[Viscosity6 5]

Does the software support it? As in, can the toggle be ticked?

And that's what i need to find out.
From what I can tell, the IPMB is there the camera input would connect to. Kinda like a hub and/or switch.
Right now my car is at the dealership for recall.

 

[Viscosity6 5]

For those curious to know. After speaking to Naviks, they still need to confirm that their front camera module will work with the 24 mustang. Has its hoping it'll be ready in April. Depends on his access to the car.
https://naviks.com/i-24078651-2024-...right-front-trailer.html?ref=category:1207148

Sponsored