Official Mustang S650 Aftermarket Wheel & Tire Thread

[Need4SpeedMotors]

Good Afternoon Mustang Enthusiast !
S650 Models are beginning to roll in!

We would like to invite everyone to share their
aftermarket wheel and tire upgrades!

Please feel free to post pics and sizing to help
current members and any new members joining the
mustang community visualize what different setups will look like on the new S650

Lets Start It Off With Project6GR Wheels

Project6GR Ten-R Satin Gold​

Project6GR 7 Spoke Brushed Titanium

Project6GR 10 Spoke Bronzold

How to Place Your Order
Phone : 1-818-547-5474
E-mail: [email protected]
Website:www.N4SM.com

Please do not hesitate to contact us should you have any questions. We have been custom tailor fitting wheels & tires on the world's best vehicles since 2002. We have over 20 years of hands on experience in the automotive industry and would love to offer our knowledge and help to the Mustang 7G community and fellow car enthusiasts

Hours of Operation:

Monday through Friday from 8:00 a.m. to 6:00 p.m. PST
Saturday from 9:00 a.m. to 3:00 p.m. Pacific PST
Our website is open 24 hours a day / 365 days a year!

Contact Information:

Phone: 1-818-547-5474 Toll-Free

Email: [email protected]
Website: www.N4SM.com

CLICK HERE TO SPEAK TO A LIVE REP!

If you have any questions or concerns, do not hesitate to contact us. We are here to help

​

[/CENTER]

Sponsored

 

[TheRuthlessObliterator]

What size are the wheels and tires? Factory size or are they bigger?

 

[Interstellar]

Also is the car lowered at all? Fitment looks super flush with the Gt250 wheels

 

[radar]

What is closest available aftermarket to Darkhorse wheels for base GT? Thx

 

[Need4SpeedMotors]

What size are the wheels and tires? Factory size or are they bigger?

The 7 spoke and 10 spoke are 20x10 20x11 with 275/35/20 305/35/20

The TenR is a 20x11 squared with 295/30/20 front 315/30/20 rear!

 

[Need4SpeedMotors]

Also is the car lowered at all? Fitment looks super flush with the Gt250 wheels

car was not physically lowered, but this is the look you will have once lowered! Looks great!

 

[TheRuthlessObliterator]

The 7 spoke and 10 spoke are 20x10 20x11 with 275/35/20 305/35/20

The TenR is a 20x11 squared with 295/30/20 front 315/30/20 rear!

Beautiful! I love wider tires.

Did you use any spacers or did the 20x11s fit on the stock hub? Also, what's the offset on all of the wheels?

 

[Need4SpeedMotors]

Beautiful! I love wider tires.

Did you use any spacers or did the 20x11s fit on the stock hub? Also, what's the offset on all of the wheels?

no spacers needed at all!

 

[TheRuthlessObliterator]

no spacers needed at all!

Awesome! What's the offset on the wheels?

Did you have to re-calibrate the speedometer? Any additional things to be done if we swtich to bigger wheels?

 

[LETHAL]

Man oh Man.. NICE!

 

[Apeman]

Do we have an idea what size wheels and tires will fit in a stock configuration? Offset? All that jazz? My guess is it's basically the same as the S550, but I'd like to know for sure before going out and spending lots of money on wheels

 

[roket]

your guy Edgar is awesome, i got some of the 7-spoke wheels from him. i haven't been able to put them on yet as i don't have tires for it yet

 

[FlyNavy86]

I’m planning to take my GT PP as is to some track days, but what tire width seems to work best for track day and autox?

 

[JAL]

I’m planning to take my GT PP as is to some track days, but what tire width seems to work best for track day and autox?

On our cars, the go-to standard for track is four wheels 19x11 ET 52, with a slide-on spacer in the front to achieve 26mm offset. My wheels came with 56mm offset and they're fine. It's the front offset that's critical because with the proper offset and camber you only have a few mm clearance to the strut. But it works fine. Tires are 305/30/19. Lots of choices in those sizes. This setup will allow for front to back tire rotation to even out wear.
You will require camber plates to achieve at least 2.5 degrees negative camber in the front to avoid excessive wear on the outer shoulder.
Trackmustangsonline has many threads on the topic that go in depth on the dual purpose track/street car setup and the "why so wide" questions and also why going narrower now will ultimately lead you to buy another set of (11" inch) wheels down the road.
Look for flowformed wheels in the 24 lb range, or forged around 20 lb. If not close to these weights = junk to avoid. Single best thing I've done. You feel it immediately.

 

[Mljh85]

View attachment 566530
Good Afternoon Mustang Enthusiast !
S650 Models are beginning to roll in!

We would like to invite everyone to share their
aftermarket wheel and tire upgrades!

Please feel free to post pics and sizing to help
current members and any new members joining the
mustang community visualize what different setups will look like on the new S650

Lets Start It Off With Project6GR Wheels

Project6GR Ten-R Satin Gold

Project6GR 7 Spoke Brushed Titanium

Project6GR 10 Spoke Bronzold

​

If you can photoshop white with Nite pack with some blue and red options thatd be greattttt... these are fantastic looking in gold on black

Sponsored