Exhaust + Suspension for wheel hop!

[sloww5ohh]

Hope you all are enjoying the long weekend!
-
so I’m going to place an order at my local shop. I need to remedy this wheel hop immediately for launches. It’s hilarious how much the car jumps. I have magnaride and I know there is the stop the hop kit. But this shop specializes in mustangs and they are saying all I need is: BMR Vertical Links and Cradle Bushing Lockout Kits to remedy this issue asap.
thoughts vs the stop the hop starter kit?
Also planning some eibach springs.
now regarding exhaust. I have the h pipe and I love it but looking for something a bit more.
-
I hate rasp and the numero uno goal is to not have any.
I can do some kooks headers and gain some power and add some vibrant resonators with the stock system. Or I’m in the air about
Awe switchback or stainless works legend.
Does anyone know if the stainless works retains the valves? Also I heard these two are the deepest options with virtually no rasp. If anyone has some other recommendations I’m open.
-
Best!

Sponsored

 

[A.alansari]

You can get the braces and vertical links from steeda or the equivalent from bmr both will do the same thing

the bushings in steeda kit not that necessary

and make sure to get the right vertical links if you have brembo breaks you will need the small vertical links (the gt 500 links)

 

[sloww5ohh]

Noted thank you for telling me!!!

 

[gbadger]

Seconded, Steeda stop the hop is amazing.

 

[Q6543]

I did just the steeda cradle bushings and locating dowels, also lowered the car… zero wheel hop with those 3

was in my buddy’s GT500 and I couldn’t believe how bad that hopped and chattered, tried telling him he has got to look into those parts

 

[MrKodak007]

I wasn’t a fan of the BMR product on my s650. Way too much noise, so I switched to Steeda and it’s a night and day difference. I recommend them over BMR for the s650…also, for exhaust I’d look into AWE.

 

[tj@steeda]

Shoot me an email to [email protected] if I can help support with the Steeda Stop the Hop kit or any other components - happy to help & get you dialed into forum pricing!

Best,

TJ

 

[86pagt]

BMR for me. I had good luck with them on a 2019 that I had so went with same on my 24.. start with the CB010 with center sleeves and the CB762… I do have other steeda parts and they are also top notch.. I believe you can’t go wrong with either one.

 

[sloww5ohh]

Ahh thanks for all the replies! Anyone have magnaflow or stainless works exhausts ? Curious how it compares to AWE

Sponsored