Disable seat belt chime on manual transmission 2024 mustang

[Luel1820]

I have a 2024 mustang GT with manual transmission and I am wanting to know if the seat belt chime can be disabled and if so how do you do it?

Sponsored

 

[Magic88]

I have a 2024 mustang GT with manual transmission and I am wanting to know if the seat belt chime can be disabled and if so how do you do it?

https://www.mustang7g.com/forums/th...atbelt-reminder-on-and-off-correction.160343/

 

[smurfslayer]

Welcome to M7G. Yeah I suspect the A10 & 6speed models are different. I had to spend a couple hours on youtube to come up with the procedure that worked; the one in the thread linked above.

 

[Magic88]

I was curious, tried it out, and it does work for both sides. Seatbelt light flashes but no chime. With both passengers, I couldn't exit out of the screen showing both belts undone though. When it was just me, it did go away.

 

[coyote25]

Hey y’all! I just joined today after figuring out how to disable the chime on my 2025 GT MT86.
1) start the car
2) set the ebrake
3) turn car off and open & close door
4) wait for all dash lights to turn off
5) start the car and disengage ebrake
6) repeat steps 3&4
7) turn on accessory mode
8) quickly press okay through popups including seatbelt info
9) buckle and unbuckle 3 times while giving the dash time to recognize each click and remain unbuckled
10) buckle & unbuckle again after seeing the icon flash
11) restart car and enjoy

 

[GrabThatBlue]

Hey y’all! I just joined today after figuring out how to disable the chime on my 2025 GT MT86.
1) start the car
2) set the ebrake
3) turn car off and open & close door
4) wait for all dash lights to turn off
5) start the car and disengage ebrake
6) repeat steps 3&4
7) turn on accessory mode
8) quickly press okay through popups including seatbelt info
9) buckle and unbuckle 3 times while giving the dash time to recognize each click and remain unbuckled
10) buckle & unbuckle again after seeing the icon flash
11) restart car and enjoy

Is this a joke?

 

[coyote25]

Is this a joke?

I mean, this is how I disabled it in my car.

 

[P2]

Hey y’all! I just joined today after figuring out how to disable the chime on my 2025 GT MT86.
1) start the car
2) set the ebrake
3) turn car off and open & close door
4) wait for all dash lights to turn off
5) start the car and disengage ebrake
6) repeat steps 3&4
7) turn on accessory mode
8) quickly press okay through popups including seatbelt info
9) buckle and unbuckle 3 times while giving the dash time to recognize each click and remain unbuckled
10) buckle & unbuckle again after seeing the icon flash
11) restart car and enjoy

I can verify that these steps work. BUT.... you must do them in order, on a Wednesday, when there is no rain, after having washed the car, waxed it, clean the wheels and tires TWICE, vacuumed the inside and having completed the final step between the hours of 3:00pm and 3:15pm with no clouds in the sky... and you have to say out loud while holding your hands together... "Please work, Please work, Please work" and then spit on the ground.
It worked for me every time.... just sayin...

Sponsored