Search results

Is any tuner able to "activate" the Active Exhaust feature on a non-AE? I believe this needs to be done in the PCM tuning section. I can use FORScan to change the IPC, APIM, and ACM modules to enable controllability on the screens, but the actual valve control still needs to be done. Build...

I can't speak for these AWE boxes, but the open-air box sealing on the hood isn't any different than the competition air boxes that people are installing on their Whipples. A seal against the hood liner isn't any different, and may in fact be better, than a heat-soaked plastic lid. The hood...

I'm by no means a spring expert, but I do a lot of auto cross and I can most definitely tell you that having a spring installed upside down DOES affect how a car behaves. Especially having the springs opposing each other like what was posted by Grabber. By having them flipped like what was...

Did they take any pictures or post any kind of a write-up? Are they on the forum?

Sad times. I pulled my door sills and I dont even have the plug. 2024 GT 301A So I guess I'll need to tap and run wires from the footwell light? Anyone else had to do this?

I have a 2024 RTR and mine didn't come with a custom splash screen. However, it looks like the 2026 EcoBoost RTR will have one. Not sure how we can get that, or what that will even look like. But I definitely want it!

I need the brackets that hold the wiring off of an Active Exhaust. I'm looking at 2 options: 1. I buy them from someone. 2. I borrow them from someone and use them to CAD my own (I'll pay all shipping fees). Ford does not sell these brackets (for whatever reason). Does anyone out there want...

I just switched to the CF intake and have the stage 1 Whipple tube. Only about 1500 miles on it. Send me a DM if you're still looking for one.

I'm in Tucson and have been trying to decide between KBSYNT/Fitcamx with the Starvis 1 chip or the Viofo with the Starvis 2 chip. I don't know what to do! Lol.

I'm in the same boat; Whippled 5.0. The gauge is more of a cool factor than a usable one. With the SC, it'd just be cool to see it articulate between vacuum and boost. Was hoping someone had figured out why it wasn't working all the time on the center aux gauges. Works great on the main screen...

Did you ever get this figured out? I've had it for a few days and have only seen the vacuum so far.

Those covers look pretty good! Are those the OEM covers?

Mine was really tight of the hoses for the clean side (drivers). The passenger wasn't too bad and fits pretty well. Definitely a good add-on.

Installed the Form Lighting side marker lights! Was raining a bit, but nothing too bad!

Haven't posted these yet. Didn't do them today, but I did recently! -Installed Whipple comp air boxes -Installed clean and dirty side UPR Catch Cans -Installed EMP rear seat delete for my Service Dog -Installed Ford perimeter shock sensor and auto start module -Enabled GTD amber lighting...

Dang. Was hoping you had luck opening them up and changing the LEDs. Was debating ordering a pair myself and tinkering with them. For now, I picked up a set of "snap on" covers from someone in a Facebook group.

Where did you end up with these? Were you able to do an RGB conversion to the RTR grill lights? Or did you just tint them?

From the diagram I have, it'd take a few hours per door. The main plug should be just inside the foot well of each door. Then you'd have to remove the door panel and start snaking the harness. Shouldn't be too hard, just takes time. Still definitely on my list of wants.

Verify the part numbers you need before you order! My parts guy at Ford went through this pretty extensively with me. @GrabThatBlue is correct in that the 301A needs the correct harness. Driver and passenger are the same harness. I'm specifically avoiding the mirrors with turn signals so that I...

Thanks to Mr. Jones (not sure his forum name), I was able to get the GTD ambers to work. I used FORScan Beta 2.4.2, bought the OBD Link EX cable from Amazon. and followed his video for Job 2. My RTR lights still work as normal (though I wish they were amber as well). My specs: 2024 Job 2 RTR...