Sponsored

Search results

  1. Received a FP Whipple tune revision

    you can email them your VIN and they will send you a link..

  2. Received a FP Whipple tune revision

    Sorry I donā€™t ā€¦

  3. Received a FP Whipple tune revision

    I have FP Whipple stage 1 and received a tune revision earlier this evening. I know itā€™s only been a few hours but has anyone uploaded the new revision? Any feedback?

  4. Cervini exterior parts

    I emailed them and they replied but didnā€™t give a timeframe for the ram air hood.

  5. SVE Wheels For 2024-25 Mustangs

    LMR DHP1 in graphite.. 285/35/19 325/30/19 Perfectly packed and shipped, mounted and balanced Firestoneā€™s ā€¦

  6. What did you do to your S650 Mustang today?? šŸ™‹šŸ»‍ā™‚ļø

    Added some Anchor Room matte black American Flag accents to the spoiler.

  7. Stock PP Package Wheels Question- Widened by Weldcraft?

    BMR CB010 and CB762 will help with sliding all overā€¦ whipple with stock Pirellis and zero added items compared to a 19x11 with a 325, and BMR goodies is a night and day difference.

  8. Stock PP Package Wheels Question- Widened by Weldcraft?

    My wife will drive mine occasionally.. no issues so farā€¦. šŸ˜.

  9. Stock PP Package Wheels Question- Widened by Weldcraft?

    Autoā€¦stock pirelliā€™s not very good.. BMR CB010 and CB762 with a 325 Firestone Indy is much better. I donā€™t floor it from a stop so canā€™t answer in traction but as your rolling slight traction loss but very little and controlled

  10. emblem and plate

    I used this bracket and have no issues https://ccmustangbrackets.com/products/2024-mustang

  11. Stock PP Package Wheels Question- Widened by Weldcraft?

    SVE DHP1 Wheel Specs Front Rear Diameter 19" 19" Width 10" 11" Bolt Pattern 5x114.3 mm. 5x114.3 mm. Offset +35 mm. +50 mm. Backspacing 6.88 in. 7.94 in. Centerbore 70.6 mm. 70.6 mm. Weight 23 lbs 23.4 lbs

  12. Stock PP Package Wheels Question- Widened by Weldcraft?

    I have a PP and a whipple. I also liked the the PP wheels but decided to go with what I knew would fit with no issues. LMR set of 19x10 for the front and 19x11 for the rear. When doing this you also shed some weight. The PP wheels are heavy. Good luck with your wheel setup

  13. Anyone had a tune affected by over-the-air-updates?

    GhastlyTT- Same here ā€¦ not completed.

  14. MP concepts chin spoiler installed!

    Very niceā€¦ I went with an add-on 3 piece because of the gap that is left or I would have gone with the MP.
  15.

    Official VAPOR BLUE Mustang S650 Thread

    Yes I got them from eBay. They have several sizes available.
  16.

    Official VAPOR BLUE Mustang S650 Thread

    I painted mine K1 which is Vapor blue metallic but it came out darker than the car. Iā€™m happy with the way they turned out I didnā€™t want an exact match anyways.

  17. Catch Can

    Yes J&L sorry they use to be JLT.. I had the FP on my 19 it did the job but the J&L is much easier https://www.jlosc.com/

  18. Catch Can

    I had a passenger side (dirty) on my ā€˜19 and would empty it every 5k when I changed oil, I never measured the amount. I would rather have it in the can then going back in the intake. On my ā€˜24 I have both sides since it has a whipple, passenger side has had some on both oil changes and the...

  19. Post your aftermarket wheels! (HELP ME CHOOSE)!

    Checkout LMR for the latest pricing.. I got the wheel tire package with TPMS and lugs ready to install on the car since I had the OEMs PP wheels sold. I did not get the forged. I think it was around $26XXā€¦. Picked the Firestone tires so I could get the 325s and they are not that bad.. I was...

  20. Post your aftermarket wheels! (HELP ME CHOOSE)!

    SVE DH1P 19x10 285/35 19x11 325/30





Top