Search results

I didn’t see anything besides dead battery’s on form, this was after a long drive. But put code scanner on and it said no codes, so unhooked the battery and hooked it back up and started right up. Just seeing if anyone else had this issue?

Just got back from hour drive, went to remote start and car wouldn’t start, got in car and every light is on dash ? Anyone else seen anything like this ? And won’t start,

I’ll have to try a can because you’re not the first to say that fixed it now.

It’s a light intermediate engine tic, ford swears it’s normal.

After about 4 months have racked up 10k and can say for the most part everything is good, had typewriters tic since new and CarPlay is relatively glitchy, but I do love the car,

Your not being to picky, I spent 65 on my gt premium, performance pack and the bumper paint match is pretty bad, and the radio is pretty glitchy.

The leds that aren’t on the door are posi taped on to the passenger foot light, it’s 4 wires and they are even color coded the same as the leds, the doors have the same thing for each door, the led by each door handle, once you make a triple check your electrical work you’d connect it

I tired to uploaded a video and it said file was too big.

Yeah it’s been few months already have over 6k miles on the car, no issues it’s only 7 leds I added to the system you could power the whole thing off a 9v battery, it’s so little draw. All leds have 3 resistors per leds they don’t get to hot it’s a low draw and led it’s self doesn’t get hot. I...

I linked the video of all the info I used to do it in this thread and the kit I used, there isn’t too much to show.

Yes it’s goes through the my color system on the screen. You can lower brightness on the my color screen

Finally got around to doing the door panels and a little wrap.

I did mine at 1k just a habit for new cars for me, takes same filter as gen 3

Some of you got lucky I get 9.5% for 72 with 815 credit and 10k down, I’m going to refi later through my credit union, but still ridiculous

Yeah I work so much, this was just little something I messed with on the weekend, I feel someone will probably come out with a kit, making the leds is most time consuming part. But I put the kit in here same one I used just without modifying it can be plugged in a done

This is the kit I used you can just wire it to 12v and use it that way but will Will just use the remote to change the color, https://www.aliexpress.us/item/3256803023108212.html?gatewayAdapt=glo2usa4itemAdapt

It’s took a few days, He going into a lot of detail but nothing to hard for your good with electronics and soldering,

Work in progress but if your good with electronics you can add leds to factory my color, still need to do door panels and cup holder, these are single leds with fiber optic cable. that are swapped from common anode to common cathode, and individually resisted to match factory spec of existing...

Doing little wrap on front

It’s easy clips just pry up at the front towards the radio