Search results

Oh yeah this is the volume steering wheel control.

buttons weren’t that bad, after I got the new one I was scratching it intentionally to see how durable it was with my finger,, but yeah really only the cruise buttion started chipping. but I’ve used this paint for years, very resilient, my 06 mustang buttons still looked perfect after selling...

2024 gt with almost 60k on it, started noticing button paint chipping, decided to order two new buttons and put a proper clearcoat so this doesn’t happen again, wonder if anyone else is having this issue.

Those voltages seem way too low, may be running too much resistance or too high of an ohm resistor

Much easier way, if you order this part number it’s all pre-wired with resistance and everything, you would just cut those LEDs off and then wire them straight into the factory wiring, they are pricey, though in total, I think I added nine LEDs total to the system.

What LEDs are you using, I used single LEDs not strips, and you just have to make sure you have common anode not common cathode, the resistance values won’t matter if the LED is wrong configuration, it’s been so long I forgot which one the car has.

I just used the pass floor LED four wires, and then each door just use the four wires off door handle LED for the door leds, its such low voltage,

It’s crazy how my 06 s197 had same issue and we are still having this problem, s650 has 50k on it now and no issues and in Florida it rains about every day, I’ll have to check for moisture, windshields seals were shot on s650 on wonder were water gets in

Yeah did the lighting back in 23 make a post on it in here if you search diy led

Cracking on wheel started getting worse so did Carbon add-ons wheel cover

When my car had 15k on or so my trim cracked and fell on day while parked in the parking lot, jb welded it and put back on, car wasn’t a year old yet. But fixed it, noticed more cracks forming and looks bad, so found carbon add on makes a cover for it and the fit it legit perfect, add some other...

Man I got 29k on my performance pack rear end. I’m curious how it looks.

That’s looks really nice it’s a shame they didn’t just do it the mustang but do it for Lincon and other ford cars

NFS GT from Florida

Somewhere in the rain sensor got water in it so wipers were just going off by themselves till the sensor dried out, just on newer Acura, never had any other problems

Yeah just use a tinting dash towel, only car I’ve ever tinted that has issues after windshield tinting was an Acura MDX, electrical went nuts

Mine done this 3 times now, just unhooking battery and letting sit for 5 mins then reconnecting, only does it randomly when remote starting

Yeah I have ceramic tint all the way around, I’ll see what dealer say, but if not glue should work, just hope rest of the carbon looking plastic doesn’t do this, cars not full year old yet

Having hot days in Florida! came back to car after work and a piece of steering wheel sitting on the seat, gonna just glue it just wondering if anyone else had this happen, it broke so symmetrically I thought it was a clip in piece, but it’s not. Car has almost 20k on it