Mike's Mustang
Well-Known Member
- Joined
- Jan 24, 2017
- Threads
- 2
- Messages
- 157
- Reaction score
- 8
- Location
- Austin, Texas
- Vehicle(s)
- 2016 GT 401A
- Thread starter
- #1
Anyone have suggestions for fixing this wax on vinyl?
I bought my GT used and it was delivered on Monday. The pictures they had showed some minor things I can fix myself, like wax on trim. It didn't show the below on the stripes. So I'm not sure if the previous owner didn't know that you shouldn't wax over matte vinyl or if the delivering dealer did it. Seems they learned by doing the passenger side of the hood first since it's the only stripe that has this issue. My main ask is getting the vinyl to look good again. There's a lot more I'm in the process of correcting, like removing what looks like hard water marks on everything. You can see some remnants in the middle painted section. I've already gone over that section once, but looks like I need to do some more based on the picture. I've already polished it off all the glass. It was pretty bad.
Things I've tried on the vinyl:
I bought my GT used and it was delivered on Monday. The pictures they had showed some minor things I can fix myself, like wax on trim. It didn't show the below on the stripes. So I'm not sure if the previous owner didn't know that you shouldn't wax over matte vinyl or if the delivering dealer did it. Seems they learned by doing the passenger side of the hood first since it's the only stripe that has this issue. My main ask is getting the vinyl to look good again. There's a lot more I'm in the process of correcting, like removing what looks like hard water marks on everything. You can see some remnants in the middle painted section. I've already gone over that section once, but looks like I need to do some more based on the picture. I've already polished it off all the glass. It was pretty bad.
Things I've tried on the vinyl:
- Just a wet Microfiber
- Matte Detailer - Chemical Guys
- Washed whole car with Chemical Guys Clean Slate
Sponsored