List of EU forum orders

[GrabThatBlue]

Hi Zbychersky,
What else did you change besides the H-pipe to get up to 512 hp?

I looked at the dyno again.

It's crank horsepower.
The wheel horse power is 443

Sponsored

 

[Zbychersky]

Still worth it

 

[MRI204]

Interesting! Next year I think I'll do Long tube, plenum, and cams of the steeda package... the goal will be to get to 500rwhp

 

[Bullit]

2000 PLN = around 470 EUR, 4 hours of work

What exactly they did to get these HP?

 

[GrabThatBlue]

What exactly they did to get these HP?

The European Dark Horse has almost 50hp less than the American Dark Horse. I guess they just freed the European Dark Horse from the restrictions. As you can see, the car makes 443hp after the tune. That is around 10hp more than a stock US Dark Horse.

 

[MRI204]

The gpf valve should be eliminated to extract all the potential... some time ago I had inquired from lundracing to get their device and access a personalized map but their answer was that it would not be compatible with their tune because of the gpf valve... the increase of those 50hp involves problems of back pressures and overheating due to the obstruction in the catalysts of the gpf valve.

 

[MRI204]

I finally managed to make a video of the discharge modes of my Borla ATAK exhaust in its modes, cold start and then test at 3000 rpm.
Others will follow where with a hot machine I will do the same test at 6000 rpm and another one where I film the passage of the car on a road!

 

[MRI204]

Buy an MPVI4, install TDN on your phone and contact Andrew's www.mustanglifestyile.net for this and unlock 500cv!
93 tune + Ghost Cam + Burble
WoW!!!!

 

[CaesarX]

For EU models with particulate filter???

 

[MRI204]

For EU models with particulate filter???

Absolutely yes!!

 

[madpony]

what does "Ghost Cam" and "Burble" mean?

 

[MRI204]

Look at post #458!

The ghost cam refers to the second video while the burbles to the third video...

The ghost cam is a modification to the valve timing to make it look like there is the presence of "hot road" cams and therefore a more captivating sound!
The burble is always a modification to the valve timing, in this case between 4000rpm and 3000rpm and makes the chops appear when the accelerator is released....

 

[GrabThatBlue]

Look at post #458!

The ghost cam refers to the second video while the burbles to the third video...

The ghost cam is a modification to the valve timing to make it look like there is the presence of "hot road" cams and therefore a more captivating sound!
The burble is always a modification to the valve timing, in this case between 4000rpm and 3000rpm and makes the chops appear when the accelerator is released....

I never knew anything about ghost cam until I saw a video. I find it horrible and unstable sounding. But I do get that people have different taste lol.

 

[MRI204]

I never knew anything about ghost cam until I saw a video. I find it horrible and unstable sounding. But I do get that people have different taste lol.

Luckily we're not all the same

 

[MRI204]

In any case, they sent me several tuning configurations that I could load onto the ECU, including just the 93+ tune without Ghost Cam and without Burble... just decide what you want and Mustanglifestyle will take care of sending it all! It can also unlock 8000 rpm.

Sponsored