Help with Magneride ride height reset

[D/\rK•650]

Im looking for any information and or support on the Magneride on my darkhorse. I have a vibration in the floorboard that im noticing when going over a crested hill "when suspension is at or near top of stroke" I had it in recently for the clunk in the driveline, they greased the output shaft and it seems to be fixed now. They could not recreate the vibration that i have so for now im looking into things I might be able to do at home with Forscan ect. Has anyone been able to do a ride height reset or re learn on there s650 mustangs? This might fix my issue but I cant seem to get it to show or it's not available on the 2025 mustangs. I've done all the steps as far as I know to do it like entering ET diagnostic mode then going to Forscan VDM module ect. There is a VDM module but all I can do is reset it and that does nothing. There is supposed to be a VDM ride height calibration option in Forscan but I dont have it. Or it's not visible for whatever reason. I will bring back to them if I cant do it but id like to try and get it myself. "Like to work on my car myself if I can". I think it's supposed to be a service option for Fords and mustangs. Any information or ideas welcomed.
Thank you in advance

Sponsored

 

[Walter]

To reset the VDM best to have a Ford Performance Dealership help you. I lowered my DH. Local dealership could not help. Ford Performance….piece of cake.

 

[D/\rK•650]

To reset the VDM best to have a Ford Performance Dealership help you. I lowered my DH. Local dealership could not help. Ford Performance….piece of cake.

Ford performance dealership? Im not familiar with that?

Sponsored