emblem and plate

[Tarz825]

hi, i installed the RTR upper grille. i liked the car more with emblem.. any recommendations…

also any recommendations on the plate frame too, my oem dont fit.. and i dont want to drill the rtr..

Sponsored

 

[Yamazuki]

I'm assuming by 'frame' you actually mean a front plate mounting bracket since you're concerned about drilling into the bumper cover.

This one is pretty expensive, but so far it has worked extremely well for me and is insanely simple to remove and reinstall the plate. I usually carry mine in the trunk until I get harassed. Then apologize to the officer, explain that I must have forgot to put it back on, and ask if its OK to retrieve the plate from the trunk and reinstall it.

 

[sultan~]

3M tape double sided working fine with me in the front and rear one.

 

[86pagt]

I used this bracket and have no issues

https://ccmustangbrackets.com/products/2024-mustang

 

[Tarz825]

is there a bracket or uou just glued in the plate on the paint?

3M tape double sided working fine with me in the front and rear one.

 

[sultan~]

is there a bracket or uou just glued in the plate on the paint?

Small PPF piece on the bumper then glued the plate to it.
I have full PPF on the car body

 

[TheACN]

I'm assuming by 'frame' you actually mean a front plate mounting bracket since you're concerned about drilling into the bumper cover.

This one is pretty expensive, but so far it has worked extremely well for me and is insanely simple to remove and reinstall the plate. I usually carry mine in the trunk until I get harassed. Then apologize to the officer, explain that I must have forgot to put it back on, and ask if its OK to retrieve the plate from the trunk and reinstall it.

Do you mind posting a few pictures please? It seems to sit a tad higher than Craig’s bracket but i wanna confirm before i pull the trigger

 

[Tarz825]

Do you mind posting a few pictures please? It seems to sit a tad higher than Craig’s bracket but i wanna confirm before i pull the trigger

Almost 100 dollars between carbonio and ccmu link ? what do you think so far ? i will follow you lead to pull the trigger

 

[Yamazuki]

Do you mind posting a few pictures please? It seems to sit a tad higher than Craig’s bracket but i wanna confirm before i pull the trigger

Ask and ye shall receive.
(Don't mind the bugs!)

 

[TheACN]

Ask and ye shall receive.
(Don't mind the bugs!)

Thank you! This seems like the perfect height, very close to where OEM bracket would sit. The partial blockage of the radar sensor by Craig’s bracket got me worried.

 

[Tarz825]

Thank you! This seems like the perfect height, very close to where OEM bracket would sit. The partial blockage of the radar sensor by Craig’s bracket got me worried.

are we buying carbonio ?

 

[TheACN]

are we buying carbonio ?

Yea I like it better. The tilt function is also something I liked. They gave me a discount code, not sure if it’s a one time use or not but feel free to try: ADRIANGT

 

[P2]

Yea I like it better. The tilt function is also something I liked. They gave me a discount code, not sure if it’s a one time use or not but feel free to try: ADRIANGT

Wow... a whopping $8.45 savings with that discount code...

 

[TheACN]

Wow... a whopping $8.45 savings with that discount code...

I know right! I'm gonna buy crypto with it

 

[Yamazuki]

Thank you! This seems like the perfect height, very close to where OEM bracket would sit. The partial blockage of the radar sensor by Craig’s bracket got me worried.

Yeah, I know there are some other brackets out there that people have tried and ended up having issues with unless they were mounted off center or some other non-standard location.

For the few times that I have actually run with the plate on, I haven't had any issues with the adaptive cruise, CoPilot 360, or collision prevention system.
The price is still a kick in the nutz for what it is though!

Sponsored