Testing Larger Throttle Bodies on the 2024 Mustang!

[tj@steeda]

The folks over at Soler Performance reached out to us to do some testing with their 90mm throttle bodies for the S650. The 24s obviously have twin throttle bodies so we're going to be increasing the size by 20mm overall. With an increased ramp, the blades open up sooner, giving your Mustang better throttle response and drivability in the low to mid RPM range. We'll throw them on our Dark Horse, take it for a test drive, and then do a dyno test to see how these throttle bodies affect the Gen 4 coyote!

Sponsored

 

[Mr Hyde]

Needs a before and after with stock intake and throttle bodies. Vs intake and throttle bodies and factory intake. Then intake and throttle bodies. Due to the DH having a slightly different tune do this on the base gt and a PP

 

[DevilDog]

Be interesting to see if they throw any codes.

 

[DevilDog]

Be interesting to see if they throw any codes.

I guess I should have watched the video first.

 

[Joe_Stang]

They provide a few hp and torque but it's yet another mod that's held back by not having custom tuning available

 

[Mr Hyde]

I would guess that if you went headers, 3 inch exhaust cat back, jlt intake and the 90mm throttle bodies, you would see some improvement all of which have been proved on the dyno to add a bit, but the dollars to what amounts to the hp gained from a tune on the s550 would not be worth it in the overall until custom tuning is unlocked.

Sponsored