Recommendation for one piece driveshaft for manual DH

[gbadger]

Anyone found one? Steeda‘s does not fit the manual dark horse (I asked). I don’t see anything on driveshaft shop either. Anyone had luck?

Sponsored

 

[Germansheperd]

What other mods are done to the car and what type of racing are you doing?
This should be one of your LAST bolt-ons especially price vs gains.

 

[robvas]

I take it the Mach 1 or GT350 one won't work? A shop like QA1 or DSS should be able to make you one up....

 

[NWFreerider]

Talk to Austin at Full Torque. He made me a 1 piece aluminum shaft for my car, DH with Tremec. Smooth and no increase in NVH. It weighs 18lbs compared to the stock 30lb two piece shaft. I tried a DSS carbon shaft and it was very poorly made and had massive vibration beginning at 40mph.

 

[gbadger]

I’ll give them a call. Thanks.

Talk to Austin at Full Torque. He made me a 1 piece aluminum shaft for my car, DH with Tremec. Smooth and no increase in NVH. It weighs 18lbs compared to the stock 30lb two piece shaft. I tried a DSS carbon shaft and it was very poorly made and had massive vibration beginning at 40mph.

awesome! Thank you.

 

[Paul's stable]

Anyone found one? Steeda‘s does not fit the manual dark horse (I asked). I don’t see anything on driveshaft shop either. Anyone had luck?

DSS makes them for manual Dark Horse last time I checked.

 

[Paul's stable]

What other mods are done to the car and what type of racing are you doing?
This should be one of your LAST bolt-ons especially price vs gains.

I agree I have a Whipple on my Tremec Dark Horse have changed axles out but left the stock shaft for now. If I have problems I can always go to one.

 

[gbadger]

DSS makes them for manual Dark Horse last time I checked.

I looked ok their site and it didn’t have one listed. I’ll call them along with the other recommendations.

 

[gbadger]

I agree I have a Whipple on my Tremec Dark Horse have changed axles out but left the stock shaft for now. If I have problems I can always go to one.

I have a plethora of work I’ve already done. I’m going to take it off for other work. It’s on the list to do so I figured I’d do it then.

 

[Paul's stable]

I looked ok their site and it didn’t have one listed. I’ll call them along with the other recommendations.

A lot of shops are making stuff for the 650 but you have to contact them. I have one of theres in my 06 GT manual and they are great.

 

[gbadger]

A lot of shops are making stuff for the 650 but you have to contact them. I have one of theres in my 06 GT manual and they are great.

Thank you.

Sponsored