Project 2024 Global Time Attack UNLIMITED S650 Build

[Mod Mustang Racing]

A little more Progress , rear suspension all fully assembled with the Penske Rear Coil Overs, MMR Toe Arm, Camber Arm and Sway Bar Links.

Sponsored

 

[Mod Mustang Racing]

Getting Closer! Engine install next month and then final plumbing and Wiring. Big Photo Dump coming soon!

 

[Mod Mustang Racing]

Front Suspension Complete with MMR Spherical Bushings, MMR "Race Plates" camber plates, MMR Titanium K member bolts, AP Brakes and Penske Coil Overs. (and yes, we are aware this is a left rotor on the right side, AP sent us two lefts by mistake but quickly sent us a replacement)

 

[Biggsy]

Front Suspension Complete with MMR Spherical Bushings, MMR "Race Plates" camber plates, MMR Titanium K member bolts, AP Brakes and Penske Coil Overs. (and yes, we are aware this is a left rotor on the right side, AP sent us two lefts by mistake but quickly sent us a replacement)

Race plates? Please share more !

 

[Biggsy]

Never mind. I see them on the site. That is some negative camber.
Does it accept multiple spring diameters? Or just the 2.5” that comes with your standard MCS kit which is what I have

 

[Mod Mustang Racing]

Race plates? Please share more !

The New MMR Race Plates are our "Race Version" adjustable Camber plates. They allow up to 5 degrees and have reduced stack height which allows coil over springs to be raised allowing for more tire to strut/spring clearance.

More pics and info here: https://www.modularmotorsportsracin...n_page=product_info&cPath=87&products_id=1667

 

[Mod Mustang Racing]

Never mind. I see them on the site. That is some negative camber.
Does it accept multiple spring diameters? Or just the 2.5” that comes with your standard MCS kit which is what I have

Many spring diameters are compatible but normally we suggest the industry std size (2.5")

 

[Junkyard Dog]

So these cannot be installed on the stock set up in place of the camber plates that Ford supplied on my car?

 

[Biggsy]

So these cannot be installed on the stock set up in place of the camber plates that Ford supplied on my car?

Negative. They have another offering for OEM which I had on my car a few years ago

 

[Mod Mustang Racing]

So these cannot be installed on the stock set up in place of the camber plates that Ford supplied on my car?

As Biggsy mentioned, the race plates are designed for coil overs, our standard billet camber plates are what you would need for stock style lowering springs and stock springs.

Those can be found here: https://www.modularmotorsportsracin...n_page=product_info&cPath=90&products_id=1538

Sponsored