OEM Ford Replacement Parts - Ford Performance - Roush Performance Parts [Levittown Ford Parts]

[Mr Hyde]

Based off the diagrams here is what I can see that would be required

Brackets (green triangle icon) Left & Right
https://parts.levittownfordparts.com/oem-parts/ford-bracket-bumper-mounting-fr3z17d943h
https://parts.levittownfordparts.com/oem-parts/ford-bracket-bumper-mounting-fr3z17d942g
HB2 Bolts x2
https://parts.levittownfordparts.com/oem-parts/ford-wiper-linkage-bolt-w711158s442
HB3 Bolts x4
https://parts.levittownfordparts.com/oem-parts/ford-door-check-bolt-w711806s450b
HB1 clip x2
https://parts.levittownfordparts.com/oem-parts/ford-outer-molding-pin-w711687s300
HS1 Screws x5
https://parts.levittownfordparts.com/oem-parts/ford-bumper-cover-screw-w716345s450b

Note, All hardware is sold individually, The quantities listed in our diagrams are not always accurate so ordering extra hardware is always recommended.

Thanks,
- Benny

Thanks benny, just wanted to know trying to add more functional aero and stability to the car along with stiffing the chassis and sub frames. Getting ready for the eventual forced induction once they unlock the tuning. I prefer prochargers vs whipples.

Sponsored

 

[sdsteele2]

Sure here are links to the spoiler and optional gurney flap which is sold separately

https://www.levittownfordparts.com/sku/pr3z-6344210-eb.html
https://www.levittownfordparts.com/sku/pr3z-6344210-ab.html

Yes that price is correct. What we have seen in the past is that when Ford raises the OE part prices a FP version is released shortly after so perhaps this may happen here. We can discount the shipping to help some.

Please let me know if you have any other questions.
- Benny

Good lord I hope you’re right, $4500 for a flap is nuts. Heck, it would be nuts if it was the spoiler and flap.

For anyone not familiar with Levittown Ford, these guys are great. I have always had great service from them. Benny has always been very helpful when it comes to finding parts.

They often put together kits of OE parts to complete mods. Maybe a kit of the Dark Horse rear valance and belly pan w/ brackets is in order Benny?

 

[LevittownFordParts]

Good lord I hope you’re right, $4500 for a flap is nuts. Heck, it would be nuts if it was the spoiler and flap.

For anyone not familiar with Levittown Ford, these guys are great. I have always had great service from them. Benny has always been very helpful when it comes to finding parts.

They often put together kits of OE parts to complete mods. Maybe a kit of the Dark Horse rear valance and belly pan w/ brackets is in order Benny?

Thanks for the feedback

Yes were thinking the same thing. Unfortunately I believe these parts will need to ship truck freight but we are still researching this. Also the parts data we have is about 95% accurate so when it comes to hardware etc.. we need to rely on real world feedback before we can confidently put a kit out there.

What we would like to offer if anyone is interested in helping us with this project is parts @ employee pricing and our cost on shipping. Please PM me directly so we can discuss.

Thanks!
- Benny

 

[Mr Hyde]

I would also like to say Levittown ford is legit and very good. I ordered the underbody strakes for my GT and they were cheaper and shipped fast and packaged to withstand an angry methed up gorilla attack or your normal package handler at ups and fed ex, That's a joke people.

 

[Neggytive]

Hi,
Can you post a photo or diagram of these pieces. I will do my best to find em

- Benny

https://www.mustang7g.com/forums/threads/convertible-plastic-cover-inserts.157632/#post-3243308

 

[agreywolfe]

what hardware is needed to install that other then the rear valence.

ill just add going to a DH rear valence requires permanent modification to the stock insert, theres two braces that you need to cut off to allow room for the DH valence to bolt up properly.

 

[Mr Hyde]

Thanks for the info. Always good to know. Doubt anyone would want to go the other way short of selling the car.

 

[LevittownFordParts]

https://www.mustang7g.com/forums/threads/convertible-plastic-cover-inserts.157632/#post-3243308

Thanks,
To confirm these are for a 23 S550

https://parts.levittownfordparts.co...r-panel-trim-panel-access-cover-fr3z7631005cc
https://parts.levittownfordparts.co...r-panel-trim-panel-access-cover-fr3z7631004cc

I will send a code you can use to order,
- Benny

 

[mnavarro]

Hi,
Do you do shipments to Spain?
Some parts vendors in USA don’t do international shipments and cancelled my orders.
Thanks in advance

 

[LevittownFordParts]

Hi,
Do you do shipments to Spain?
Some parts vendors in USA don’t do international shipments and cancelled my orders.
Thanks in advance

Hello,
Yes we do but will be limited to UPS size constraint's. Its best to PM me directly so I can send you a custom quote. Also please note our shipping charges do not include any import duties, taxes or fees.

- Benny

 

[themizario]

Hi, I'm trying to find the stakes that go under the Dark Horse plastic fins that attach to the frame, I want to add them to my GT. Can't seem to find them anywhere.

 

[Mr Hyde]

Hi, I'm trying to find the stakes that go under the Dark Horse plastic fins that attach to the frame, I want to add them to my GT. Can't seem to find them anywhere.

https://www.levittownfordparts.com/...AMThOn275IG-bruu22rZF1RRtA4Z0zrkCQye76cu-EwdU

 

[themizario]

https://www.levittownfordparts.com/...AMThOn275IG-bruu22rZF1RRtA4Z0zrkCQye76cu-EwdU

This is perfect! I'm going to order them today!

 

[DannyJ7]

LevittownFordParts,

Can you 100% confirm this will work on the S650? Hearing that they operate on a 433MHz frequency, which is in conflict with "TPMS74 (868mhz) is the ones needed for the S650." according to @sofaking.

https://www.levittownfordparts.com/sku/m-1180-433mhz2.html

 

[LevittownFordParts]

LevittownFordParts,

Can you 100% confirm this will work on the S650? Hearing that they operate on a 433MHz frequency, which is in conflict with "TPMS74 (868mhz) is the ones needed for the S650." according to @sofaking.

https://www.levittownfordparts.com/sku/m-1180-433mhz2.html

Hi,
I just ran a S650 VIN and its equipped with 433mhz. I doubt that there are multiple frequencies in use but I will be happy to check your VIN.

- Benny

Sponsored