New** NES Forged Wheels by MRR Design 1pc and 2pc

[CarlosMRRDesignWheels]

Im very excited to introduce our NES Forged line up to the Mustang community , I know some of you already know our history with the 5gen and 6th gen platforms and we dont plan on disappointing for the 7th gen. On this thread I will be posting both our 1pc forged options and 2pc forged options plus some surprises here and their.

MRR|NES Forged wheels
Customize them your way

1pc forged wheels
built 100% using 6061-T6 alloy
custom sizes from 18" to 21"
custom widths from 8" to 13" wide
Hub centric bores
Custom color options including brush effects and ceramic polishing
OEM center cap acceptance ( optional )
7-8 weeks build time

2pc forged wheels
Barrels and centers are
Built using 100% 6061-T6 Forged alloy
Concave floating spoke center designs
Hidden or exposed hardware options
custom color inner and outer barrels
custom color center options
hub centric bores
light weight back pad pocketing
oem center cap acceptance ( optional )
7-8 weeks build time

Custom Color Collection

​

Sponsored

 

[CarlosMRRDesignWheels]

How about we start our first thread with something that pops. yes we know its a 5th but still part of the family.
lets get to the wheels.

NES Forged Wheels
Model
MS-6
custom color
Hand brush / Glowing yellow

If your interested in the wheel information please contact me by emailing me at [email protected] or simply send a PM. here is a direct link to our main site
https://www.mrrwheels.com/collections/nes-forged/products/nes-ms-6

 

[CarlosMRRDesignWheels]

One more quick look at our NES Forged MS-06,
this one was hand brushed through out and layered with a matte tinted graphite color.
check them out below

available in 19" and 20" in a variety of colors , widths and specs

​

 

[CarlosMRRDesignWheels]

How about a look at one of our top selling models, This is our FS06 which is Part of our Flow forged collection and we also have two more variations in a fully forged option. This one is shown in a custom Hand brushed finish layered with Gloss clear coat.

MRR Wheels FS06

 

[LCDRChemEng]

Would you please help out the ill informed with some information?
Is there a benefit to forged vs cast?
Is there a performance benefit to a 2piece vs 1 piece or is it just a mix of colors?
What is so special about 6061-T6 alloy? Is that what the terminator is made of?
What is ceramic polishing?
What is a back pad pocket?
Thanks in advance!

 

[CarlosMRRDesignWheels]

Would you please help out the ill informed with some information?
Is there a benefit to forged vs cast?
Is there a performance benefit to a 2piece vs 1 piece or is it just a mix of colors?
What is so special about 6061-T6 alloy? Is that what the terminator is made of?
What is ceramic polishing?
What is a back pad pocket?
Thanks in advance!

Ill give it a try for sure. i wont go into the details cause that would be pages of information but ill make it simple and to the point

 

[CarlosMRRDesignWheels]

How about a look at one of our classic 5 spoke split designs, This is our SS-1.1 from our NES 1pc Forged collection. available in multiple size options and color options. Custom built for your Mustang and we can even have them cut to accept OEM Ford center caps.
available sizes
18", 19", 20", 21" and 22"

 

[CarlosMRRDesignWheels]

Here is a look at our NES Forged FGX, Shown in a custom full hand brush with a matte titanium tint.
available in 18" 19" and 20"
custom built to your desired specs or our recommendations.

NES Forged Wheels
by MRR Design

FG- X

 

[Katastrophe]

If you could...can you post some 2-piece delicious-ness for us? Something with some LIPS. YUM!

Bonus points if you post something that has an applicable offset so we can see the lip size!

Thanks!

 

[CarlosMRRDesignWheels]

If you could...can you post some 2-piece delicious-ness for us? Something with some LIPS. YUM!

Bonus points if you post something that has an applicable offset so we can see the lip size!

Thanks!

While we do offer a wide range of 2-piece forged options, it's important to note that the design possibilities for a lip are limited on the new Mustangs. This is due to the increased size of the caliper systems on these vehicles and the influence of the car's offset requirements. To address these challenges, our focus often shifts towards utilizing two-piece wheel designs with a distinct "floating" center. This design not only provides the essential caliper clearance but also incorporates a concave shape towards the center, serving both functional needs and aesthetic appeal.

Below is a sample of one of our two piece builds

 

[Interstellar]

Holy smokes those are sexy. I bet the price tag isn’t though

 

[CarlosMRRDesignWheels]

Holy smokes those are sexy. I bet the price tag isn’t though

It's important to consider the value you're getting in return. These wheels are more than just a visual upgrade, they're a testament to precision engineering and advanced design. When you invest in these wheels, you're not just buying a product; you're investing in improved performance, safety, and a distinct personality for your Mustang.

 

[murciful]

Jesus Hot! C'mon. Enough tease. What's the damage for full set with TPMS? Please pm price including all season rubber delivered to Illinois.

 

[Mljh85]

Whats the price tag on the red/black 2 piece? I know its custom color, just curious

 

[CarlosMRRDesignWheels]

Just a little look at a front shot of our NES Forged MS-5

Sponsored