Sponsored

Anyone Install Audi A4 Wind Deflector on Their S650 Convertible?

mmff88gt

Well-Known Member
Joined
Nov 22, 2019
Threads
3
Messages
47
Reaction score
55
Location
NW Ohio
Vehicle(s)
2026 Mustang GT Convertible
I had the Audi A4 wind deflector on my 2019 convertible and loved it. I especially liked that it could be folded in half and placed in the trunk, unlike many other options. I had already marked the holes to drill on my new 2026 -- same interior trim panels beside the rear seats -- when I wised-up and decided to check behind where I was going to drill. Unlike my 2019, my 2026 has a bunch of electronics that I wound have drilled into if I had proceeded without checking first. Does anyone have a work around? TIA.
Sponsored

 

jbrnigan

Well-Known Member
Joined
May 31, 2025
Threads
4
Messages
157
Reaction score
269
Location
S. Indiana
Vehicle(s)
2024 F250, 2025 Lexus NX, 2026 Mustang Ecoboost Convertable
I mounted an A-4 wind screen on my 2026 ... I removed the trim covers to insure that I had clearance behind my mounting holes. After drilling the holes I installed rubber grommets. There was no interference behind my mounting hole locations.
hole.webp
screen1.webp

Since I have 'memory' seats, I located the mounting holes to accomdate the seats all the way back.
 
OP
OP
mmff88gt

mmff88gt

Well-Known Member
Joined
Nov 22, 2019
Threads
3
Messages
47
Reaction score
55
Location
NW Ohio
Vehicle(s)
2026 Mustang GT Convertible
I mounted an A-4 wind screen on my 2026 ... I removed the trim covers to insure that I had clearance behind my mounting holes. After drilling the holes I installed rubber grommets. There was no interference behind my mounting hole locations.
hole.webp
screen1.webp

Since I have 'memory' seats, I located the mounting holes to accomdate the seats all the way back.
Your holes are about where I had marked to drill mine. When I popped the top piece off for a look, the area I would have drilled into was full of electronics. Yikes! Maybe our cars are optioned differently. I didn't have the electronic stuff there on my '19.
Your install looks great! Thanks.
 

glenng6

Well-Known Member
Joined
Jul 8, 2024
Threads
1
Messages
828
Reaction score
833
Location
Easton, PA
Vehicle(s)
2024 Mustang GT Premium Convertible, Shadow Black
I mounted an A-4 wind screen on my 2026 ... I removed the trim covers to insure that I had clearance behind my mounting holes. After drilling the holes I installed rubber grommets. There was no interference behind my mounting hole locations.
hole.webp
screen1.webp

Since I have 'memory' seats, I located the mounting holes to accomdate the seats all the way back.
 

glenng6

Well-Known Member
Joined
Jul 8, 2024
Threads
1
Messages
828
Reaction score
833
Location
Easton, PA
Vehicle(s)
2024 Mustang GT Premium Convertible, Shadow Black
That wind screen looks identical to the screen on my Saab convertible, which also folded. Glenn
Sponsored

 
 








Top