Search results

You said this started after an OTA update? Message me the VIN and I'll poke around to see if I see anything helpful. I would try disconnecting the negative cable from the 12v battery for 20 minutes. You'd be surprised how many little nuisances that can fix.

Correct. I think the 4th bit already has a 1 IIRC.

Yes. The X just means leave whatever is there as it is

I see a couple of things of interest here. I pulled the config from a 2025 Mustang and these bits in the APIM stand out: 3rd and 4th bits of the first block are C1. According to the spreadsheet: So these bits would need to be changed to 41 to enable DM night and day and keep everything...

This is what he said: "The pin at the IPMA needs to be grounded...momentary switch will go to ground and it will trigger the IPMA to turn on the camera. You can use any switch to do this." There is a guy on the Mach E forum that did something similar. The thread he made about it is linked...

I don't see why not. Below is what he told me when I asked about it: "Its basically a ground.. All they need to do is ground that pin.. it doesnt have to be the factory camera button.. any momentary switch would work." I am trying to get more clarity on which PIN he is referring to, because...

If you ever try it, you will need to enable RCOD view at speed here in the IPMA:

This was irking me, so I reached out to one of the gurus over on the F150 forum about this. With the exception of the Lightning, the firmware on 12" APIM's does not contain the coding for rear camera hot key that can be enabled on the touchscreen. It can be done, but it requires a physical...

Yea, to add ACC, you need to add a cruise control module, but lane centering relies on the camera mounted on the windshield. I still think it has to do with the PSCM firmware that differs between the auto and manuals.

The Bronco is very different from these cars. They still use the old system to manage driver assist functions. They have both and IPMA and an IPMB whereas these cars only have an IPMA. Whatever is required to get this to work on the Bronco would differ from these vehicles.

Interesting. There has to be a way then.

Usually getting the button on the touchscreen is the easy part but getting it to work is the issue.

Not sure why. One of the guys on the Bronco Sport forum ordered mirrors with the motors built into them, installed them and made some FORScan changes and they work perfectly now. Same thing would need to be done to the Mustang if someone really wants them.

Same thing with my girl's Bronco Sport. Vehicles in other markets have them, but the US versions don't.

I have no idea what it would look like on this vehicle if it could be added. Sometimes these things work and sometimes, they don't. To someone comfy/cozy with FORScan, they would just need to try and see what happens.

Well, if you or anyone wants to try, I would enable MCS soft button here: This setting for SCPK may or may not be relevant, but worth noting. My truck has SCPK disabled, but I have both a hard camera button and a button on the touchscreen to access the multicamera menu bar.

Do you remember what you changed when you tried?

If there's one thing I've learned: Codes are not problems.........only problems are problems. Both my vehicles have codes they are reporting due to modifications I did. I just ignore them because I am getting the desired results I want. As long as I have no lights on the dash, these soft codes...

Maybe with FORScan. There is existing configuration in the APIM to put a camera button on the touchscreen.

Correct. Ford implemented some kind of AI cybersecurity system towards the end of last year. If the AI suspects any kind of activity that falls outside of how Ford feels FDRS should be used, it will auto-ban the account. If that happens, there is no number to call. All you can do it email them...