Search results

good luck with boost gauge.. it will always display in gauge detail but for me it comes and goes on the auxiliary panel.. sometimes available sometimes not but I don’t usually have the aux gauges displayed.. but when it is available it is easier to see

It really wasn’t hard to put the letters on.. I don’t understand why being in the curve would make a difference when they are individual.. Should the website say these are cut straight and each letter must be applied separately or these are cut at a curve that resembles the intake tube and must...

It’s not one piece each letter is separate on the backing paper. This might help you out

Yes no transfer tape… I used the cheapest clear tape. Actually packing tape and put it over each letter.. Don’t press super hard on the tape. Just enough to have the letter stick to it..then since you have the clear tape you can see where to place the letter. Lightly press to stick the letter to...

Battery disconnect or double check the spring that engages the slot in the actuator…

👍 on the intake tube lettering

‘24 Vapor Blue PP Nite Pony..LMR DHP1 wheels, BMR handling springs with FP shocks and struts, Other BMR stuff in the rear, Steeda front tension links with bearing, Steeda front sway bar and camber plates. Steeda H pipe and FP Extreme axle back exhaust with DH valance. FP Whipple.

Here is mine with the competition intakes.. If you turn it around bolts should line up. The little raised part should go towards the filter

I think they would look good, I think a grey or graphite would accent the stripe. I’m not a chrome person so I went with LMR DHP1 19x10/11 gloss graphite. I also have a 24 performance pack but a stage 1, lowered on BMR Handling springs. I went with the 325s for the rear tire. Good luck on your...

Decided to go do something different. The grey looked good. Since it’s hard to match Vapor blue I decided to go with a flag theme to go with the Ford Performance plates.

no problems at all … I purchased them about a year ago, easy install I believe someone did a write-up somewhere

How about a set of FORM side markers? https://www.formlights.com/2024-2025-ford-mustang-led-sidemarkers-set.html

With stock air box

installed wrong … wide part go to the intake tube

3 piece add-on fit is good, looks good and doesn’t break the bank in case it get messed up. https://ebay.us/m/TM0oaM

3 piece add-on fit is good, looks good and doesn’t break the bank in case it get messed up. https://ebay.us/m/TM0oaM

I have a few rinseless sponges but I really like the Autofiber double flip. https://www.autofiber.com/products/double-flip-rinseless-car-wash-microfiber-towel-8-in-x-8-in-1100-gsm-3-pack

Updated Price

Just get them directly from Anchor Room https://anchor-room.com/

2019 Mustangs (and 2015-2020 models) may experience a clicking or ratcheting noise from the side mirrors when using memory settings, easy entry/exit, or auto-folding, typically addressed by SSM 49217 or SSM 51937. The issue is usually caused by the Driver/Passenger Door Modules (DDM/PDM) needing...