Search results

in 2024 ordered mine in April, knowing I needed it in July in order to break it in, then drive it to FL where it was going to stay. By the middle of June I had heard nothing and the dealer I ordered it from was no help, so I looked online and found one that had everything I ordered except for...

If a tree falls in a forest and nobody is there to hear it fall is the husband still wrong?

If you think being on the mechanical side is fun , try being on the body shop side. "can you bury my deductible?" Sure what part of the job don't you want me to do. Or That dent in the RF fender wasn't there before the rear end 5 MPH crash Or When I was writing for MAPFRE as an appraiser...

I have not updated my snap on scanners in a year, and I need to do the one in FL because that is where the Mustang lives but the software revision I have in that machine does not have a lot of the 24 Mustang stuff in it There are a lot of things you can change with a bi directional scanner if...

Ok I know that Forscan is basically a product that allows a user to go in and change lines of code that configure the car. 1) where does one get the software 2) cost? 3) adapters to go from PC to OBD2 port ? 4) if the software is licensed to they limit it to one car (locked by VIN) or can...

Join Mustang Club of America for $35, wait 90 days and get an X plan number You can order the car in advance, and it is easy to figure out what the car will cost, as long as you have an X plan number at the time you pick up the car you are all set, providing the dealer participates in the...

Ford stopped shipping them with the cars during the 6th gen series, the inserts rubbed against the top leaving wear marks. The 6th gen ones fit the 7G cars, some of the 6G guys with 7G cars found theirs in the garage and used them, I ordered a set from Benny @LevittownFordParts almost 2 years...

No, it is not.

There is something to be said for living in a "stand your ground" state.

that is 2LT 2026 Corvette money Sorry the Mustang GT's with any sort of performance packages are beyond reasonably priced for what you get.

Are you looking to look good or be safe? You are adding power, are the wheels going to take that power without breaking? SFI 15.1 certified?

They send it to someplace like Rim Pro and get it refurbished for a couple of hundred bucks, then the tire tech scratches the sheet out of it mounting the tire without using the protective sleeves in the tools https://rimpro.com/

they just data mine every state DMV database for new registrations and send them out by the millions hoping someone is stupid enough to take the bait. If my car is stolen I don't want it back. I have been in the business too long and seen too many recovered thefts that have had tens of...

Line Lock launch with the tires already spinning

TPMS sensors are the one problem I hate to deal with Assuming that since 3 sensors are working the receiver that is on the left side of the trunk behind the trim is working, if you can isolate out the bad sensor great, if not then you need a tool that reads the sensors on the wheels and...

https://www.machinerylubrication.com/Read/30165/oil-oxidation-stages

Aluminum has good heat transfer properties so as long as your radiator, fans,hoses and coolers are in good shape and air flow is not blocked the heat in the engine is going to transfer thru various fluids and be dissipated in the coolers as air flows over them. The head temp can be 50 degrees...

Impala, pale green. 6 cylinder car.

Someone posted once that the sensors for the fill in panels are still there even though Ford does not ship them with the car or even list them as a PN for the 7G cars, although the 6th gen car inserts fit and even then Ford stopped supplying them with the car due to concerns about the inserts...

My car is about 2000 miles since the last change and it is at 45% and dropping every day due to Fords calculations that are not only factoring mileage, type of use, etc but it will never let you go more than 12 months without prompting you for an oil change. I had it done last August, one year...