Search results

I’m still having keyfob range issues. still very convinced walk away lock is causing this

i ordered MP concepts side scoops for my 15 V6 and they fell off. I got an MP concept rear spoiler and it was flimsy. this was back in 2019-2020

i did a write up on replacing all the speakers. You 110% need an amp if you want to notice any difference at all.

MP concepts makes terrible parts bro. they don’t usually fit. I’d go for CJ Pony Parts or Roush

god no. through the passenger door

i went through two pairs of the etsy holders. you have to make sure the little tooth from the seatbelt holder grabs the top part of the OEM seatbelt guide. If it doesn’t sit flush, the guide will have a bit of a space and the seatbelt will pop out when putting on. Also, it’ll be a bit loose and...

i think it’s doing this because the antennna is looking for the key to leave a perimeter and that’s interfering with the overall range. i haven’t tested the long range after the update but if it’s working again, i’ll just leave it as is.

did you notice your keyfob range changed after you enabled it? my keyfob only works within 100 FT. anything over it won’t work

i programmed the walk away lock and it worked for a bit. My keyfob signal wasn’t working when i was over 200 ft away though but i had walk away lock. i now currently do not have it anymore after the car updated itself. has anybody seen anything like this?

damn i haven’t looked into this in a minute lol. i’d have to get both plugs male and female and then convert it to a Y plug that’ll go into the cup holder.

Time alignment wise I used the cup holder as a center point. My DSP is pretty cool in the sense that it allows me to input the distance & it’ll do its own time alignment calculation. This really brought the whole system together

I have a DSP you fool lol. I did time alignment, adjusted each speaker to each individual frequency and used an oscilloscope to make sure everything is calibrated. The sound system is designed by B&O not made by them. It’s fords shitty tuning.

You’ll need to redo the whole sound system to get this to sound acceptable. I swapped speakers at first and got less crunchy highs but nonetheless still mid quality sound

B&O system should give you more dynamic control though. The stock system only gives you 3 bands. Having total control of each speaker and its frequency / gain is a game changer.

this should have been stock on the DH 110% !!! Matches the door panel trim beautifully

You can also do a remote turn on to the window/locks fuse but you 110% need to grab power from the battery. The window switches stay on until you open the driver door. I don’t recommend the door fuse remote tap because ever since the latest update, the radio has a 2-3 second delay before...

First one I grabbed remote signal from LOC (not my fav thing to do as its signal sensing). Second one I used the AMP PRO interface from PAC and it has its own LOC converted bass signal from two of the four wires coming out of subwoofer harness (they both got the same signal) everything wired...

Are you using the center speaker? It kinda throws off the whole set up. I have the center and upper door mids running off a 4 channel

I ended up changing my setup completely. I’m running an 800x2 on the door speakers and two 440x4’s for the upper mids, tweeters and deck. Got a 1600Wx2 for the sub.