Search results

I couldn't find a listing for them at Rock Auto or Tascaparts; you might wish to consult with your dealer's parts dept (if you haven't). Good luck!

You might try some of this on a cotton rag (I've used it many times on many things; it does work good on adhesives). It won't harm paint & plastic, etc. I bought mine at the local WalMart or Meijer...

Congrats! Terrific Team effort! 🤞 PS: I was a bit surprised you didn't list your Rapid Red paint in the performance section...................everyone knows it's good for a couple of 100ths. 😉

Right there with ya......................................seeings how mine sits outside all the time! 🤞😆

Not aware of any commercially available undertrays with access doors; though if I remember correctly one forum member posted about his home made one. If our UTs are anything like the ones I had on my Focus ST and Focus RS (fiber board with rat fur) it seems like it would be fairly easy to fab...

Lookin' SHARP! 👍

Nicely done! 👍

Man! You dyslexic dudes **** me up! 😉 Are you sure that's not SPE Motorsports; NOT PSE Motorsports? 😆 https://tsp-parts.com/products/spe-motorsport-s650-mustang-carbon-fiber-cold-air-intakes BTW: Very sharp looking CAI! 👍 UPDATE: Ho Lee ****! It should look good for that price! 😅

I've got a J & L PCV (passenger side) can on my GT. Just put it on a couple hundred miles ago, so haven't checked it yet. I'll probably check it on the 5s (10K, 15K, 20K, etc). Don't expect to see much accumulation though.

😆 Well.........................the ZR1's interior was certainly a BOLD automotive fashion statement! And.......................the Vette raises the bar on **** rear visibility with the resurrection of the split rear window. I guess with a 1064 HP ZR1 you need to keep your foot on the gas...

Congrats, welcome, and LOOKS GREAT!

Ditto! Never understood the urge to pressure wash (other than commercial vehicles, mud trucks and the like). I use my garden hose with the nozzle set to the shower setting. Lots of water; very little pressure. I have been thinking about trying the foam cannon technique lately though.

@Mr Lahey --Dang! Sorry you got such ****** service. An oil/filter change is about as basic a service as it gets. If you ever have any explosive devices left on your GT; I wouldn't take it to that dealership for disarming! 😉 Guess I'm lucky. My dealer's Fastlane Service is pretty good on...

Stock??!! What's that? 🤷‍♂️ 😉 Our engines are fairly well stressed by Ford; I really don't think there's much meat left on the bone without going the supercharger route and that's not an option for me because I'm a normally aspirated guy (my last two cars were turbo 4s). So I've...

Yes. I like WEC; was stoked to see Ford Mustangs as 1 & 2 (while it lasted). Where it counted though? "In LMGT3, Marino Sato, Sean Galael and Darren Leung took victory, in the #95 United Autosports McLaren 720S GT3. They were followed by Kelvin van der Linde in the #46 WRT BMW M4 GT3...

As boring neutral colors go; not to mention godawful repetitive shots of the same painting sequence combined with **** back ground music it's OK. 😉

The pads clamp on with 2 allen head set screws. 2 pads on each side; I loosen the screws on the second pad and move it to where I want on the pinch rail and place my stands/jack, etc under it. Piece 'o cake.

Another option for our Mustangs (I had Steeda JRs on my former Focus RS and they worked great) is ZL1Addons jacking pads. I've got them on my GT and they also work great. Additionally, they weigh much less than rails and are easier to install (just ran my GT up on my car ramps as opposed to...

https://www.livernoismotorsports.com/ They installed some kit on my former Focus RS, as well as a 93 O dyno tune that gained me 65 HP over stock. Very positive experience! I have two friends who've had work performed by them. One has a GT500 that dynoed at over 800 HP (I think) at the...

Welcome and congratulations on your new Mustang GT! Do you have any pics? Apparently there are some RPM shift point limits programmed into the OEM Mustang/A10 tune in the upper gears. I've read that one or more of the recently released after market tunes rewrites that part of the PCM code...