Search results

It was fully custom cut by the shop I went to! Cost about 700 total to do. I originally bought a kit but the cuts were terrible from big worm graphix. Not at all trying to throw shade or anything at them I just wasn’t a fan. I’ve seen other people get their kits and it was good.

Got some super snake stripes installed at a local shop yesterday, sadly couldn’t get any good pictures since it’s been raining so this is the best I got. Went with matte black center with red pinstripes and I think it turned out pretty good!

I was able to get mine working, my math was definitely off, i had it right the first go around but i found out the green LED was fried in some way making it dump 10v to it (not sure) but it was fixed by just using a different LED. everything is in and looks awesome!

these measurements are before doing any of the math to find the resistors needed. The car was measured on the floor light connector, and the LED I'm trying to put in was measured on the original controller it came with (while still in common anode)

this is what I measure. Both the car and the LEDs were measured on white. Just doesn’t seem right.

My bad, they are indeed just a single LED not a strip. It’s exactly like the ones in the video just not the aliexpress item. I do soldering and micro electronics in my free time, the ones I got were in common anode and needed to be changed to common cathode so I’ve done that as well for each of...

Been trying to do this, seems like my math just ain’t mathin to find the resistor values lol. I wire it all up and my green never works properly. Certainly been a headache considering I’ve measured values at least 20 times now on both the strip and the car. 🫠

Here are written instructions for how I did it for my job 2. Do this at your own risk if you can. Also still reccomend a battery charger! You need Forscan v2.4 Beta. You will need a paid extended license to access this version. It is $20 for 1 year. Open Forscan and Connect to the car...

Wanted to update this thread here, i was able to do this on my job 2 entirely via forscan 2.4 beta extended license. if you have the SBL, Strategy, and ECU Configuration files you are able to do it. That’s all I’ll say.

exactly how I feel as well.

bought a used one and it was perfectly fine. itll be good.

Makes sense now. last update for me was August, even with auto updates on.

Mine has worked perfectly fine this morning. I may have not gotten an update yet.

DH just stands for Dark Horse

I've personally been waiting for a nice big wickerbill to come out. been waiting forever. If I had to recommend any right now best bet is a DH style. They seem to look the best in my opinion for what's in the market.

If it makes you feel better, I bought this car and not even 2 weeks later a deer ran out in front and destroyed my bumper. replaced the bumper out of pocket then a rock split my windshield 2 days after putting the bumper on 🤣

Saw this storage organizer on amazon, didn't find any models of this anywhere, but I feel it'd be nice to be able to print this. Mainly just looking to have it on the passenger side, I just don't know how I'd go about modeling it. 🤣

I feel the pain. 3 weeks of owning mine, someone dinged my quarter panel with their door, I hit a deer, then my windshield was hit with a rock. The roads aren't kind sometimes 🤣 I also agree it is a perfect excuse for a nice hood :)

I literally just read through this entire thread, and it got updated just now. 10/10 read. Very humorous. Thanks for updating it as well lol.

It is real, already have spotted them here near me in VA