Sponsored

Search results

  1. Patched My Fender Well Holes - DIY Instructions & Photos

    You're welcome. That's what this forum is for. To help each other. Many have helped me out too !
  2. Guess what UPS dropped off today?

    That looks pretty darn cool. Do you have a link to this product ?
  3. Found rust on pinch welds - best course of action to remedy?

    150 grit for metal should work well for what I see. They make sand paper for wood and for metal. Get the stuff for metal. No need to apply the rust neutralizer to non rusted areas. You could lightly scuff those areas with some 220 grit so your top finish paint adheres and bonds good.
  4. Snow chains

    Snow socks are also an option
  5. Found rust on pinch welds - best course of action to remedy?

    Sand it. Tape it off. Apply rust neutralizer. Then use your factory touch up paint...
  6. Existing inner fender damage?

    Possibly turn the drivers side wheel hard left to allow better access. Opposite for passenger side. Also you could take the wheel off.
  7. What color/type of lug nuts?

    Zooming in on the product it looks to be a 2 piece Lug Nut. Can you confirm?
  8. What color/type of lug nuts?

    Spendy $220 plus taxes and shipping for 20 nuts is nuts. Sheesh !!
  9. Voltage fluctuation issue

    Is the car your daily driver? I got my car on 8/22/24 but it was manufactured 5/2024 and sat for 4 months. I had lower voltage readings as I drove the car. I put it on a good battery tender and now it always reads higher voltage numbers when I drive it. It's not my daily and due to the weather...
  10. Engine Oil Change Trap Door Please.

    Mine are not aftermarket. They are a Chrysler product. 🤣 Box of 50 for 10 bucks delivered.
  11. Engine Oil Change Trap Door Please.

    Matt, The other day I had to pull the liner to retrieve a small battery cover connector. I had to pull a factory push pin off the bottom shield and it got trashed. I compared the 2 and they are the same so I pushed it into place and it seated very firm and snug. They come in a box of 50...
  12. S650 Mustang OTA History Thread

    I reviewed the spread sheet. My car was manufactured in April 2024 and delivered to the dealership in September 2024. I only have 1 of the updates shown in your spread sheet, The ECG-24.2.5.6.2 so I will just wait to see when the 10.1.1 update arrives.
  13. S650 Mustang OTA History Thread

    Is that the 10.1.1 update or is there another screen somewhere that shows that?
  14. S650 Mustang OTA History Thread

    Another question. Under the tab "update details" in my car it had a code at the bottom Left: ECG-24.2.5.6.2 and I was wondering what that means. Also is there another screen that would show the date of this update and any other expanded information. These photos show all I could find.
  15. S650 Mustang OTA History Thread

    Thank you for confirming. I've had the car for almost 3 months and am finding this community/forum very helpful.
  16. S650 Mustang OTA History Thread

    I recieved this update in early October as well. Are there any other updates I should be getting soon ?
  17. OTA 10.1.0 Just dropped.

    Can a owner just turn the vehicle On and make sure it is connected to wifi to start the trigger instead of starting the engine up?
  18. OTA 10.1.0 Just dropped.

    Interesting. In September I went out to my car and when I started it a message showed up on the screen saying a update had been installed. It happened overnight when I was asleep and the car was off. Edit: also are you saying if your car is not being used in the winter that the updates expire...
  19. Engine Oil Change Trap Door Please.

    Got mine on Amazon. These fit perfect...





Top