- Thread starter
- #1
Running a 10.5" +24mm offset front wheel on a 2015-2025 Mustang (Non-Handling Pack) might seem unheard of, but it can be done. This wheel spec was found on PP2, Mach 1 with Handling Pack, & Dark Horse with Handling Pack. To install these wheels on your Non-Handling Pack Mustang, you will need to use the M-18183-MDH 2015-25 Mustang Ford Performance Camber Plates.
https://lmr.com/products/how-to-run-10-5in-24mm-offset-front-wheel-2015-2025-mustang
As you can see here, our S550 was set up with almost -3° camber for it's track setup for an HPDE event. This particular car is running a 305/30/19 Michelin Pilot Sport Cup 2 which has a unique sidewall that sort of "rolls" into the tread, making it easier to fit this aggressive size.
https://lmr.com/products/how-to-run-10-5in-24mm-offset-front-wheel-2015-2025-mustang
As you can see here, our S550 was set up with almost -3° camber for it's track setup for an HPDE event. This particular car is running a 305/30/19 Michelin Pilot Sport Cup 2 which has a unique sidewall that sort of "rolls" into the tread, making it easier to fit this aggressive size.
Sponsored
