Definitely in certain situations. I just put tape over it and went on the highway and turned the wheel full lock in the parking lot and nothing on the tape
I’m not really sure when it rubs. I’m pretty sure when it compresses a lot and if the wheel is turned. Mines rubbing right on the outside fender. It’s wore a little bit of paint off you can’t see it at all but it wore through the PPF a bit as well. I’ve kind of just been yanking on the fender...
@Carter1776 did you ever resolve that rubbing? I got 275/35/20 20x10 with +35 offset and I’m getting rubbing in the front driver side as well. I’m already at -1.8° of camber still slight rubbing. No rubbing on passenger side
I have the same issue rubbing on driver side front top fender with 20x10 +35 offset 275/35/20s. Camber is at -1.8° which is already a pretty decent amount for the front. Still rubbing slightly. May give the fender some love taps with a hammer
Thanks!! I’m switching them out for 275/35/20s I thought I was going to run into rubbing issues but there is more clearance than I thought there would be
The HP dark horse splitter doesn’t fit the GT I’ve already tried it. Everything sorta lines up except the ends on the bumper and the mounting on the DH splitter is more shallow so you can’t push the splitter all the way on.
Are there any companies working on spoilers for the s650? Preferably dark horse/GT performance pack reps? I’ve seen everything else getting made carbon fiber, vents, trunks, hoods, grille inserts etc… nothing heard about a spoiler yet.
Looks good. Any rubbing in the front at all? Even at full turn? I’m running stock 255/40/19 with 25mm spacers and at full lock I have a finger width of room between the fender liner and tire. debating about 265/35/20 or 275/35/20 but don’t want to rub on turns. Also do u have magneride or no?
Yes. Was working for the past few days after install. Now passenger side doesn’t work. Guess it reverted it to the passenger side. Hopefully it just needs another new harness on the passenger side but this is pathetic going to need to take the bumper off again 3rd time now all this labor and it...
I’m not sure if it fixed it I went to bed after I put it in lol but yea u have to take the bumper off unless you placed the wires in an area u can reach