Search results

Hmmm, they made one for 56 years in Australia, wasn't called Mustang though....................................... That's a supercharger by the way........................................

I'm heavily guided by my sense of smell in just about every area of my life. I have a very strong sense of smell, to the point where I can smell things others can't. Scent is also strongly tied with memories for me, both pleasant and unpleasant. This is both a blessing and a curse. I decided...

Motorplast is nice, which is used in the same manner as Hyper Dressing, ie onto a wet surface and allowed to dry/self-level. This is what you are aiming for when using Motorplast and Hyper Dressing, generous coverage. From here, you can use a blower or compressed air to help spread into the...

Those are for the gallon concentrate. Your smaller bottle will be premixed at 1:1, so cut it 50/50 with water to arrive at 4:1.

Did you buy the gallon concentrate of 946ml RTU bottle? These are the gallon dilution ratios. I mix it at 4:1 or 5:1 for a natural, "barely there" look. Meguiar's Hyper Dressing 2:1 333 ml 167 ml 500 ml Medium Gloss 3:1 375 ml 125 ml 500 ml Satin Finish 4:1 400 ml 100 ml 500 ml...

No reason why you can't, but it will be a time-consuming endeavor. With so much intricacy, you would have to be very careful to not end up with high spots in areas that are hard to access properly with your towels. In theory, you would coat the black plastics (fuse boxes/battery trim...

The mowers are fine if you cut frequently, but if the grass is damp or longer than ideal, the bar blade and narrow discharge chute will struggle to process that grass into the catcher. Same applies to all American mowers, I went that way once and ended up having to get rid of it as stopping...

EGO's battery technology is second to none, both the battery itself but also the chargers. I rate the blowers, the work light, misting fan, power inverters, hedge and grass trimmers. The pressure washers are supposed to be a decent option for those without access to power and water. I'm also...

If your engine bay was ultra dirty, you could use Bilt Hamber Touch-less, foam it on and allow to soak, then rinse off with water. Mist with some Hyper Dressing or Koch Chemie Motorplast and job done. In your case, I'd stick to giving it the occasional rinse, and wipe down with your favorite...

Very much depends on the engine bay. THE KEY thing when it comes to using a hose or pressure washer under the hood...................................just use common sense. I know a lot freak out, but modern cars are very well made in this regard, and anyway, water can enter the engine bay from...

For heavy cleaning, I'd do Koch Chemie Green Star mixed at 10:1. Spray it on, agitate with brushes, then rinse clear. You could also use a decon style soap such as Carpro Lift, NV Snow+, Koch Chemie Active Foam. Foam it on, agitate with brushes, then rinse. After cleaning like that...

Restocking some favorites.......................... There are two separate orders above. Most of it came from Detailing Shed, but I had to get the towels from CarCareCo. I tend to avoid buying from CarCareCo if I can help it, their website is woefully bad and contains a number of bugs and...

Yeah, I tried a Dyson for car cleaning and it just doesn't work at all. Actually, I have a pet hatred for Dyson, overpriced and over marketed Chinese made JUNK. I've been using a Milwaukee M18 vac for quick clean ups, and a larger Karcher wet/dry vac for when I need outright grunt. I hate...

For this week's wash on the Ranger, I decided to go a little deeper than usual. To start, I removed the neoprene seat covers and put them into the wash with Rags to Riches. For the washing, I wanted to do a bit of a reset in preparation for a topper. This vehicle has had Gyeon Pure EVO on it...

I went looking for the 473ml bottle at each of the Australian distributors, all are sold out. I'd normally say buy small bottle first to see if you like it, but I can honestly say you are safe skipping straight to the gallon size. Amplify be used on pretty much any surface; paint, black...

The two I ordered took a similar time frame. Depending on the cover, I suspect most of them are ordered from the USA and rebranded. I have a hunch that the covers for the locally made Commodore's and Falcon's are made here, but the Mustang ones are imported. This would be why its taking a...

The buying is the fun part! :giggle:

Just posted this in the car care section on maintaining exhaust tips - How To Clean, Maintain & Protect Exhaust Tips | Mustang7G - 2024+ S650 Mustang Forum (Dark Horse, GT, EcoBoost, GT500, GT350, Mach 1)

How To Clean, Maintain & Protect Exhaust Tips Ok guys, let’s talk about exhaust tips! I find this area of car care often gets forgotten. As in a guy or girl will spend plenty of time cleaning and shining the paint, making the wheels and tires perfect, and even making the engine bay clean enough...

Expertly chosen! :like: