Search results

https://www.mustang7g.com/forums/threads/check-engine-light-after-installing-k-n-air-filter-and-removing-carbon-traps.160973/ I've noticed some dry, re-usable filter kits for the DH, from Steeda. I checked Air Raid and Ford Performance for their offerings; they do not have any, for now. Agree...

I checked the thread on TSBs, recalls and all that. Didn't see anything. You noted the mileage. The car should have learned your driving style and habits by now. Yes, I'd check the fluid next. Autos have come from the factory a quart/liter or more down. You could check yourself or head to the...

https://www.mustang7g.com/forums/threads/dark-horse-driveline-clunk.160917/ Still studying the comments, but here is a thread discussing a similar issue (?) with a DH. @Ford Motor Company

Yes. I read about that earlier. https://www.cnbc.com/2024/06/03/ford-michigan-central-station-campus.html https://media.ford.com/content/fordmedia/fna/us/en/news/2024/06/03/michigan-central-station-reopens-as-heart-of-a-culture---tech-hu.html

Actually, yes. :crazy: Different type of connector, but same general location and fault.:curse::computerrage: https://www.mustang6g.com/forums/threads/urgent-check-clutch-line-at-brake-master-cylinder.84132/ To the best of my knowledge, there was never a recall. Aftermarket kits are...

This is from a 2022 Blog Post on the Stewart's web site, "In 2020, the company struck a deal to buy the local Polsinello Fuels distributor with the intention of bringing gasoline from industry leaders, including Sunoco, Citgo, and Mobil."...

@Ford Motor Company I feel I discovered a design flaw in the S650 steering wheel. In the initial post, we can see how the metal portion of the wheel is surrounded by the plastic. It's a given the metal will expand at a different rate, and against that border. While it might not break as...

My thoughts on the topic:

On the day I took receipt, a couple were picking up a brand new F150. Cats? Gone. Cut out the night before. At the dealer. New vehicles are prized. The internal metals are not spent as much as a used unit and are worth more. Tundras are #1 on the hit list; they have multiple, large cats and...

Interesting. It's a very clean cut or impact, almost right in the center. Almost seems intentional. Are we looking at the end facing the engine, or the back, towards the trunk? If the former, I'd think some type of road debris. The latter, someone backing over something, maybe during shipping...

FWIW, I've had mine covered in 70% XPEL ceramic and never experienced an issue. Getting the windshield tinted is not as common as doing the sides or back, but it's getting there. Here, they do all kinds of makes and models. I've never read of anyone having a problem. If water is a concern, they...

Gonna guess it's the metal expanding by a greater amount than the plastic, forcing it to break. Looks like the car was sitting with the Sun bearing down on that spot and the seat? If so, maybe get a Sun shade or try parking in a different orientation.

It does happen. Fortunately, not often. An earlier thread at 6G highlighted the same with a GT350. But I don't think "1 of 1" applies. :giggle:

No firm answers, but some checks this AM confirm it's happening across late model Fords of all kinds. Harmless, and appears related to software updates or patches. None of the threads I read confirmed the root cause of these messages.

"...the hydraulic clutch pressure line may not be properly retained to a locating stud on the dash panel..." I'd visually check the line end-to-end for anything (loose connector leaking, missing attachment, damp area, etc.) while focusing on the area highlighted above. I'm not involved in the...

For materials that seem glued on, I take a wet cotton cloth and just lay it on the surface for a bit; that's often enough to loosen the material and then wipe off. I'd never use anything at a gas station. It's nice they make the bins and squeegees available, but you have no idea what any of...

No. While a dealer might match price on an item, I doubt the quality or craftsmanship of that work will be the same what you find on your own. Several dealer add-ons aren't necessary. Others, while they might have a practical purpose, will use poor quality materials or be installed in a...

As a reference, I looked at multiple DH photos on-line. The gaps don't seem as great. In the photos you've posted, I've noticed how the arc of the wheel well itself is not even around the circumference of the tire; it looks higher up top, relative to the rest of the well's arc. You've already...

https://www.iowadot.gov/erl/current/GS/content/2001.htm#Section200107 https://www.iowadot.gov/erl/current/cm/content/CM 3.50.htm Some specific tests and tolerances are highlighted above. Certification requirements could differ from state-to-state. https://catscale.com/contact-us/faq/

In the first photo, it looks like someone cut an access port, to reach the inside fastener. Notice how the curves of the hole are rounded and appear to be made with purpose. The leading point of the triangle is where they started their cut, until they struck the bolt and cut around that. A...