Search results

If you receive any more pictures or additional information, please post. Temp sensor arrived yesterday, waiting on the harness.

From the angle provided, it looks the same. Maybe I have the wrong harness but that is the only harness extending through the trunk. It connects to the active exhaust, backup camera, and the charcoal canister from what I can tell. I'll look some more this evening.

I would not think so either but what do I know. For that fact, I could be looking at the wrong harness but that is the only harness that runs through the trunk and looks to plug into my active exhaust. Does your Mustang have Active exhaust? A picture of the harness on a DH or PP would be good.

Upon further investigation, I think the only way to make it work is to change the main harness for the rear of the vehicle to the DH or PP harness. My guess is the PP harness has the pin for the diff sensor and the DH adds pins for the rear diff cooler. All the pins on the non-pp harness and...

Roket66, can you tell me what app you used to find the harness? I would like to compare the harness the pigtail plugs into to see if there is a difference between the DH, PP, and Non-PP. The harness that runs into the trunk is a 12 pin harness that is missing 3 pins. Hopeful the pins missing...

I did and then double checked it on Fdrs. I will send you the module address on Sunday as I am out of town and don't have access to my spreadsheet.

Exactly.

This is great. Thanks roket! As for the dash, yes. I have access to Fdrs and I already it turned on for both the auxiliary gauge display and the center info display. Just need a temp now. Ford dealer provided me the part # for the rear diff sensor, 9L8Z-6G004-B. They also said the same...

Thanks. I've been looking for the past two days. Fortunately, I have the active exhaust so hopefully the connector the pigtail plugs into is somewhere close and easy to spot. Ford OEM parts online doesn't show a picture of the overall harness the pigtail plugs into. By chance are you looking...

Anyone know if the rear differential temp sensor harness is a pigtail harness that plugs into then main harness for the rear of the vehicle? Any pictures would be great. Looking to install the rear diff temp sensor and harness into my non-PP Mustang. Already have the sensor which threads into...

Your Mustang is a PP from the factory and had the temp sensor installed prior to the installation of the cooler?

Did you have to drill and thread the boss for the temp sensor or was it already drilled and threaded?

Are the rear differential temps on non cooler installed S650 Mustangs "inferred" like the engine oil temps?

Great info. I can confirm after installing a thermalcoupler with the oil cooler, the temps are 25-30 degrees cooler than what is displayed on the dash. I installed the OEM PP oil cooler, radiator, and front brake ducts back in December and have monitored the temps closely since the install...

PP (Performance Pack) has venting for the oil cooler on the drivers side. Both side have air ducting for the brake.

Also has a different fan and shroud. Same water pump and cylinder head temp sensor.

PP radiator is different as it 17mm thicker than the non-performance pack.

Recently added the OEM oil cooler, PP radiator, front brake ducts, and PP fender liners to my non-performance pack S650. Not seeing any change in my oil temps. Still running 210-225 on the highway. Haven’t had it back on the track since the install. Thermal coupler installed at the cooler...