Search results

I went my own way on the design and installation of a diff cooler. The pump and fan are standard fare from Summit Racing but the plumbing and wiring are unique. I wanted simple and effective. I placed the thermostat switch as close to the diff as possible. Most of the brass fittings were from...

Does anyone else's car read 140F on cold start no matter what the ambient temperature is? Mine would read 140F even when car sat for 8 hours in 20F weather. The cylinder head temp won't budge until the actual temp goes above 140F. The dash temp gage operates as expected.

I added the @Steeda K-member brace on my 2025 GT with PP. It took some light mods to the undertray to make it fit. I also had to drill holes in the stakes to allow the use of washers to shim the brace away from the Trans cooler. I know their photo shows the under tray covering the K-member...

I added a removable oil filter access panel to my GT. I plan to add a Steeda K-member to the cradle and I will not be going through an R&R to change the oil. I used a paint marker to trace the opening (while panel installed) by reaching through from the wheel well. I used a Dremel with 1/8...

Does a Ford Motorsport / OEM Under Vehicle K-Member exist? I have a 2025 GT with PP and the option list calls out a "black painted strut brace" and a "K brace" separately a few lines down. This made me think it came with a K member/brace. It does not have anything underneath. The thing that...

Saw this on Facebook. They make decent points. Could be sponsored by Ford for all I know. I know I am tired of hearing the complaints that Mustang are not as cheap as they were before Biden. https://www.facebook.com/share/p/19igicqSdf/

I just got this the Purolator Boss PBL22500 filter from Amazon and it has a couple problems. I am not crazy about how the core has a giant spiral seam and the perforations seem small. The check valve is also pinched at the crimp joint. I used a borescope camera to look inside. I will be doing...

Anyone install the AR RTR knockoff hood stripes and notice they are curved when they should be straight? No matter how I try to split the difference they will run out of the body lines.

Anyone try these yet...

Does anyone know anything about the WIX WA11361 air filter for the S650 5.0? Has anyone purchased them? It appears to have better filtration than the OE filter and claims to be water resistant which would come in handy for doing the grill mod. It is more than 2X cost of motocraft so I was...

Been waiting since June for my grabber blue 2024 GT 300A with 10A, PP,active exhaust to get scheduled. I dont want to spend $5k for stuff I care nothing about. Not even a 45 day email. Sales is no help. Ford chat is like South park cable company episode. I'm getting pissed. I tell a friend...

Has anyone heard of problems with the oil wetted oil pump drive belt on the 5.0?

I have heard several complaints about the amount of feedback the S650 offers the driver when pushing the limits cornering. Do any of you see this as an area for improvement? Has anyone looked into this? Are there any parts in the works to help improve road feel like stiffer bushings or steering...

I ordered a 2024 grabber blue GT auto with PP on June 22 2024. I received an order confirmation email from Ford on June 24th with an order number. I never received a 45 day update. I called dealer shortly after no 45 day update and they told me order showed "clean" in system whatever that means...