Search results

You know what builds pressure in a garden hose? stuff (LIKE OIL!) flowing through it. The oiling system on a new mustang (ideally) is a closed loop. If you *have* pressure, oil is flowing like its designed to. The forces placed on bearings at 5000 rpm, or 800 rpm, when combustion events are...

Here's what I know The oil pump is driven by a gear. This gear is driven by a sprocket on the crank,. The crankshaft will turn when you engage the starter under ideal conditions. If the pump is spinning, it's going to be moving oil from the pan into the engine. With a modern high performance...

I got my car back from having the drivers side cat replaced under warranty, just in time for winter. has anyone done a before/after dyno with the new calibration from Whipple? Just curious how they're keeping the peak power the same if they took timing out of it, or adjusted the cat overtemp...

all stock w/ stage 1 whipple, I've gotten my oil up to 115c just on the street without trying too hard. Already went through a factory cat, was replaced under warranty but the car was down for two weeks. If you are going to track it, I'd probably leave it stock, unless you've got thousads of...

I have a twin disc on my shitbaru, it's fine except for the rattle between gear shifts when the clutch is disengaged. getting going from a stop requires a little finess, but I have no torque and a awd drivetrain. I can't speak personally to any of those brands, but I'd really rather only have...

As a professional with decades of experience in IT, and the ongoing enshittification of most products, it's even easier to get aggravated by technology.

Hey, I'm no Steeda fanboy. How long did you hit the clamps with the rattle gun? You complain about how badly Steeda handled the situation yet refuse to work with them when they offer any kind of amends. Take a look in the mirror dude.

Im not sure any of you should be operating automobiles.

I dropped my car off on the 20th. talked to SA on the 27th. He has a replacement cat, but is waiting for FP? idk. someone, to approve the warranty claim. Not sure how long the hold up has been waiting for FP to get back to them. It's tire season here so the service department is busy and they...

Did you have to contact whipple for the new tune, or did they email it to you unsolicited

I mean to say maybe the winter blend accelerated its demise. I accept fully that forced induction played a role. The whole reason I bought the Ford Performance whipple kit is because there was supposed to be some kind of planning and safeguards in place to not lunch my motor and its federally...

Mine rattles with nothing in it. apparently they have to order the whole headliner or some shit and its on national backorder so ???? when it will arrive.

11500 km, got my whipple stage 1 installed at 7400 km or so, and my drivers side cat is done. P0430 codes and my one tailpipe is white. I always ran 94 octane from major retailers here. I wonder if it was switching to the winter blend of gasoline that did it in. Car seemed fine previously. No...

sofa king cool. Also also, aktshually, Just the BMWs delivered to Switzerland are defective? If there was a widespread issue of brake failure on BMWs, the NHTSA or /other/ relevant agency in a large market would be looking into it.

"we will not have any further information" So anyone who got a whipple calibration under warranty is gonna get a free motor? Kinda annoyed I haven't gotten anything from whipple about this, or ford. If there is a legit concern then whipple and ford need to be upfront about it, or let me run a...

"prone to brake failures" dude if that held any weight the NHTSA would be doing a recall. My 135 and M5 both had the brakes hold out longer than this car. I'm barely 10k kms into owning my dork horse and the front rotors are wearing funny. Not to mention all the rattles in the car, and the...

If you unscrew the cap, does the level go back to max?

https://www.mustang7g.com/forums/threads/whipple-calibration-on-hold.170761/post-3424026 If you'd read the thread beyond the first post....... I've had 6066-M8800 installed on my car since mid June. Loving every minute of it, and will get in as many pulls as I can before winter hits.

I'm seeing 19.5 degrees of advance on stage 1. Things seem just fine so far. my lambda is .71-.73 at WOT in 4th near redline. Stop reposting / spreading AI slop like its factual or means anything.

I meant the obvious slag/splatter on the face of it, not the very obvious spot where the sticker goes.