eldnov
Active Member
- Joined
- Apr 10, 2026
- Threads
- 7
- Messages
- 42
- Reaction score
- 14
- Location
- Washington State
- Vehicle(s)
- 2024 Ford Mustang GT
yes, the one on the steering wheel
Sponsored
Sponsored
OP
OP
Kaleza
Well-Known Member
- Thread starter
- #49
Didnt add anything for a long time, but now i finally have a garage so it was time to continue making some changes. I added form lighting led rear reflectors. Process is very simple, but the space is super tight, but if u have stock car its easier. I have aftermarket rear diffuser thats glued to underbody panel which made things much harder, also i have rear mud guards from rokblokz that i had to remove. So it took a while but im happy with the results.
SR5BART
Well-Known Member
- Joined
- Sep 9, 2025
- Threads
- 2
- Messages
- 76
- Reaction score
- 130
- Location
- Arlington Heights IL
- Vehicle(s)
- 25 Grabber Blue GT PP
Man I’ve been on the fence on buying it but dammit I just might have to pull the triggerrtr hood vent
DFW YELLOW SPLASH
Active Member
Are the wheels square or staggered?
can you provide some rear quarter angle to see fitment?
can you provide some rear quarter angle to see fitment?
DFW YELLOW SPLASH
Active Member
Are you using spacers on the back?
I like how this setup looks
I like how this setup looks
OP
OP
Kaleza
Well-Known Member
- Thread starter
- #56
Today i added steeda x pipe. I have rtr side skirts which makes jacking up the car a little bit harder. Yes i know i need jacking rails, i already purchased them they will be here probably next week 
. So i backed up the car on rhino racing ramps, and lifted front right wheel a little bit in order to stick one jack in the front location. In order to do that i needed metal magnetic pinch weld pad for floor jack and rubber one for jack stand (ill post pictures). After that i cut the exhaust still on the car, and installed x pipe. Its tight and annoying, but its doable. Im quite happy with the sound. And to be honest its sound quite different in person then over the phone.
. So i backed up the car on rhino racing ramps, and lifted front right wheel a little bit in order to stick one jack in the front location. In order to do that i needed metal magnetic pinch weld pad for floor jack and rubber one for jack stand (ill post pictures). After that i cut the exhaust still on the car, and installed x pipe. Its tight and annoying, but its doable. Im quite happy with the sound. And to be honest its sound quite different in person then over the phone.
Sponsored
