Disable rear seatbelt chime?

[Dxm]

Does anybody know how to disable rear seatbelt chime? When you have a rear passenger sitting there.
Thanks.

Sponsored

 

[AlphaQueu]

Does anybody know how to disable rear seatbelt chime? When you have a rear passenger sitting there.
Thanks.

didn’t they update the software and it was fixed?

 

[Dxm]

I wound up following the procedure for the Ford Trucks and it worked. There is no way to disable the warning chime from the settings.


Before following the procedure, make sure that:
* The parking brake is set. 

* The transmission is in park (P). 

* The ignition is off. 

* All vehicle doors are closed. 

* The driver seatbelt is unbuckled. 

1. Switch the ignition on. Do not start the engine. 

2. Wait until the seatbelt warning light turns off (about one minute). You must complete Step 3 within 30 seconds after the seatbelt warning light turns off. 

3. Buckle then unbuckle the seatbelt three times at a moderate speed, ending with the seatbelt in the unbuckled state. After Step 3, the seatbelt warning light turns on. 

4. While the seatbelt warning light is on, buckle then unbuckle the seatbelt. After Step 4, the seatbelt warning light flashes for confirmation.
* This will switch the feature off if it is currently on. 

* This will switch the feature on if it is currently off. 


 

[ChitownStang]

I wound up following the procedure for the Ford Trucks and it worked. There is no way to disable the warning chime from the settings.


Before following the procedure, make sure that:
* The parking brake is set. 

* The transmission is in park (P). 

* The ignition is off. 

* All vehicle doors are closed. 

* The driver seatbelt is unbuckled. 

1. Switch the ignition on. Do not start the engine. 

2. Wait until the seatbelt warning light turns off (about one minute). You must complete Step 3 within 30 seconds after the seatbelt warning light turns off. 

3. Buckle then unbuckle the seatbelt three times at a moderate speed, ending with the seatbelt in the unbuckled state. After Step 3, the seatbelt warning light turns on. 

4. While the seatbelt warning light is on, buckle then unbuckle the seatbelt. After Step 4, the seatbelt warning light flashes for confirmation.
* This will switch the feature off if it is currently on. 

* This will switch the feature on if it is currently off. 


This didn’t work on my manual dark horse

 

[Farmer Fran]

Will a seatbelt blank work?

 

[ChitownStang]

Will a seatbelt blank work?

Probably, was just trying to avoid buying one.
Every other car I’ve owned including the 21 Mach 1 I was able to disable

 

[ChitownStang]

It should work.

The red seatbelt symbol never goes off. Waited 2 min

 

[ChitownStang]

Maybe you should get it scanned .

Not sure what that means

Sponsored