Search results

I haven't done the work yet and wont until it warms up a bit as I have read that applying PPF in higher ambient temps is better.

Last question. I found these spots because I just got done doing a paste waxing. Do I need to strip off the wax in the area to use the touch up paint and/or apply the PPF? If so, what method is best to locally remove the wax?

Thank you for the info. I ordered the anchor room precut PPF from CJ Pony Parts for this area. I'll do the touch up paint, then install the pieces the next day. Won't worry about the clear coat cause the PPF will be there.

How long is needed to let touch up paint cure before applying the PPF? Will the PPF application solution try to rehydrate and wash away the paint if no clearcoat is added over it?

I was giving my car a spring wax today and noticed a couple rock chips on the area in front of the rear tires. I see that CJ pony parts has PPF specifically cut for this area. Is it alright to put PPF over rock chips? Years later when it's time to remove it, will the PPF try to take the...

I'd ask to see the wheel bead area and tire bead area while they are apart. See if the wheel has imperfections like surface porosity in that area.

What ended up being the issue?

I financed but had enough of a down payment that the loan started at under half the purchase price and I'll have the loan finished within 2 years easy.

I was unaware of this. So as the suspension flexs the IRS cambers more negative. Thank you for the info and picture.

I have a stock suspension 2024 GT premium non PP that originally had 19x8.5 wheels with 255/40R19. I put on 20x10 +34 Velgen classic5 V2 on a squared setup with 275/35R20. I will start out by saying they look awesome!! My only slight point of concern is the rears seem to be out far enough...

I agree here. Back in the day, I had an intercooler on a 2000 Pontiac Grand Prix GTP 3.8L. The pump and a fan override switch were setup this way so I could get the fluid nice and cold in the staging lanes. Having said that, I did drain the battery a time or two by not switching them off.

I have emailed this question to velgen and gorilla to ask, quoting the specific cj pony parts part number. Assuming I'll hear from them early next week. Mustang6G also had a thread on this with many different opinions.

I see you had an earlier thread on this topic. It appears you are using the splined lug nuts and I am using standard type. Was the quote from Gorilla and Velgen of 125 ft lbs max only for the spline design, or for the smaller diameter design in general?

I have tires mounted on my new Velgen Classic5 V2 wheels and plan to put them on my 2024 GT this spring. I have the Gorilla small diameter lug nuts from cj pony parts (part#WHLLN16). They are 3/4 vs factory 13/16. I know factory lug nut torque is 150 ft lbs. Do I still torque these small...

I wish that decklid (not the wing) was for sale minus the shelby badging. I love how it follows the lines of the vehicle.

Downstate, south of I-80.

As my new wheels are on their way, I am faced with the question of which tires to get. I live in Illinois, so cold weather sets in for the winter months. I am trying to decide between: - Michelin Pilot Sport All Season 4 - Michelin Pilot Sport 4s This car is my daily driver and I will have...

I had the same issue but with depth. When I had my Hpipe installed the guy I go to is insane at attention to detail. He lined everything up before welding and clamping. Had me look at it on the lift to agree it's square, then welded and clamped. Side note, I got the roush hpipe, so it can...

Thank you for your replies. These were exactly my thoughts. I was looking to see if others shared my concerns.

Looking for opinions from the community if this indeed normal and I am too concerned, or if this is not normal and should be of concern. PLEASE NOTE: I will not be naming and shaming. I will not post what wheels these are nor the manufactuer. I received 4 wheels and upon inspection, I...