Search results

I run 19' 8.5x19 ET30 on front and rear. I wan to change to 20' 11x20 -> 305/35. Which ET suppose to be used ? Does it make sense to having 19' on front and 20' on rear ? My plan is Whipple and that's a reason to change rear.

APIM and ECG would report only about Lost Communication, nothing more.

TCU is located on the left side of the trunk. I do conversions for TCU and APIM S4 ( Canada / USA -> EU include Sync 4 Build : 25329

It is not about software. It is about HW. Send me PM.

Wrong IPMA which does not support front sensors.

I can not find on YouTube or anywhere else how does IPC Cluster looks like on GTD - if there is own Theme.

Apim is not an issue. I have already AX and even newer EL version. My question is what else beside GTD car logo give us ? I hoped GTD has new Theme for the IPC but seems all the same :)

What is difference in IPC beside the GTD animation - car ?

Well, I did not succeeded to get working sound from front sensors. It looks like it is related with IPC, as I checked ACM, IPMA - from other cars which got it working ( e.x Escape 2024 ) and it behave same. I did not have a chance to check FW from Mustang MY26' if maybe something changed or not.

PM

PM sent.

I have FDRS and TRON is not an issue for me, thing is that I have genuine IPMA so I do not need make AUTH.

So, I use genuine ipma + hw mod for lin. I did make tests and.... 1. Updated IPMA to Mustang 2025 FW - no sound 2. Changed IPMA to 2024/2025 Transit - no sound - this FW was from transit which had 4+4 PA - NO 360 Camera - it means it suppose to work ! I did even copy(1:1) as builds from IPMA...

I did.It is not about that. It looks FW inside IPMA is not correct one which can handle that.

I did.

Correct. So: ACM does not get info from IPMA or GWM does not forward correctly info into ACM.

Front Park Sensors works fine - they turn on automatically on lower speed like in other 2021+ Fords. Point is no sound from Front ones. Rear ones are fine.

1. You can use any 2020+ park sensors JU5T-XXXX 2. They are 3 pins - LIN / POWER / GND 3. Each Sensor has LIN pin -> IPMA 4. Each Sensor has POWER and GND - all 4 sensors together to POWER and GND -> IPMA 5. It means You need make own socket near by bumper to connect your new wiring on the...

I only miss sound from front sensors. I assume that ACM or IPMA FW miss some strategy.