Search results

I received the shield. It is very sturdy and fits great. Because it is sturdy it takes some work to get it to fit. Time will tell how durable it is.

Thanks everyone for the suggestions. I ordered the Pigenius .

Does anyone have a sunscreen that fits and is durable? If so where did you get it? Thanks

I have a lawnmower with a Briggs & Sratton 4 HP motor. It has a filter cover, I can't feel any difference in power with the cover on or off.

I'm thankful that we have a "car guy" running a car company. Do you think we would have these performance cars with a "bean counter" in charge?

You might have a dead cell. Get a battery tester and test it.

Does anyone on this forum have a bad BCM?

Unions = crap quality!

I ordered the patches from PonyKing and Frank shipped them in 1 day. Then they sat for a week in Germany before DHL put them into a shipping container. It took about a week from that point before they where delivered. The box was crushed and 1 of the patches was broken. Contacted Frank and he is...

Hey Mat1955, Are you sure you had a 10r80 in your 14 Mustang? The 10r80 wasn't installed in the Mustangs until 2018.

When I ordered my car 2 years ago, I did extensive research on the 10R80. What a horror story! At that time there was 3 class action lawsuits going. It is the hottest running trans out there, you have to use a special fluid for it. The root cause of the problem is that Ford didn't want to...

Read the GT350 and Mach 1 forums about changing the fluid and what it will do for shift quality. They use the same Tremec 3160 gearbox. The Motorcraft fluid is crap. I put Redline D6 in mine and what a vast improvement. If you change the fluid, the owner's manual quantity doesn't take in account...

Hi Mitch, Need help in getting the P/N for a 10mm stud mount tie. It is an Avery Dennison P/N 20153-0. On their website it says that it's Ford # FU5T-14E047-KA. Local dealer can't find the real Ford number. It fits over a stud holding the shock tower brace and holds the battery cable in place...

It is an Avery Dennison 10mm Stud Mount Tie, P/N 20153-0. On their website it says that it's Ford # FU5T-14E047-KA. They are on E-bay if you want to buy 1,000 of them. My local Ford dealer can't find it in the parts fiche. He says that he is in contact with Ford and no luck so far.

I think this might be the name, not sure though. It slips over the stud on the shock tower and holds the battery cable in place. I had to cut it to get the shock tower brace off.

If you change the fluid, don't go with chart above for fluid quantity. It doesn't take in account the fluid that is in the cooler. Your going to need about 3.5 qts. If you go with the Redline D6 they sell it by the gallon. Got mine from Amazon. I can't emphasize enough what a vast improvement in...

The Motorcraft fluid is crap. https://www.mustang7g.com/forums/threads/stiff-shifting-with-tremec-trans.159617/

I checked my knuckles today and what a pain in the ass to see the serial numbers. To get a good look at the numbers with the cell phone, I had to take off the caliper. The caliper is held in with the longest caliper bolts I've ever seen, about 4"s long. Putting the caliper back on, I had to use...

Thanks, found it. Also was able to lock in some presets. It looks like the number of presets is limited to about 6. Seems like a low number to me. My Lincoln has a bunch of presets for each source. It's been awhile, but there is 30 presets. I think you have to open the SiriusXM module and...

I ordered the American Muscle Clutch Pedal Spring. They advertised that it fits ALL 15-24 mustangs except the GT350 and 500. Well it doesn't fit the Dark Horse. The spring diameter is much smaller then the stock spring. I couldn't muscle the stock spring back in and had to drive it to my...