LevittowFordParts.com New Team Member! 🏁

[LevittownFordParts]

Good Evening Mustang 7G Members,

My name is Mitch and I have been working for Levittown Ford for a few years and am going to be assisting Benny with forum members on Levittown Ford’s Behalf. Besides for working with the brand I am a huge mustang enthusiast myself! I have owned about 5-6 (coyote's, gt350's and GT500's)so far and will be adding more to that number in the future along with other Ford vehicles! I have experience with a variety of years including the S197,S550, and now S650 platforms. I currently am lucky to own my pride and joy which is a 2014 GT500 which I will attach pictures below of the car and the build! The car has Bolt on’s and is tuned by Lund Racing and made a solid 705 rwhp on 93 octane and I plan on doing a lot more work in the near future! If anyone is ever need of assistance with anything Mustang related or Shelby when it comes to OEM I can defiantly assist you and be as transparent as possible!

Please feel free to PM or add onto our thread if you are in need of any help!

Thank you!
-Mitch C.
LevittownFordParts.com

Sponsored

 

[RaceRedder]

Welcome Levitown Ford.

I do need some help and maybe you can find this one out.

Do you know if my Mustang GT Premium with the 401A package and Recaro seats has the wiring inside the door panel to install side mirrors with turning signals? My car doesn't have turning signals because of my Recaro seats and I want to order the side mirrors with turning signals and install them on my car.

 

[Cobrakit]

Benny/Mitch, can you confirm the as built p/n for the A10 output shaft flange for my 24 DH and if there is an updated part? Number I have is ML3Z-7089-A.

ViN 1fa6p8r06r5503514

 

[RaceRedder]

Benny/Mitch, can you confirm the as built p/n for the A10 output shaft flange for my 24 DH and if there is an updated part? Number I have is ML3Z-7089-A.

ViN 1fa6p8r06r5503514

This is the replacement part

JL1Z-7089-B

 

[Iceman28]

Hi Mitch,
Need help in getting the P/N for a 10mm stud mount tie. It is an Avery Dennison P/N 20153-0. On their website it says that it's Ford # FU5T-14E047-KA. Local dealer can't find the real Ford number. It fits over a stud holding the shock tower brace and holds the battery cable in place.
Thanks

 

[RaceRedder]

Hi Mitch,
Need help in getting the P/N for a 10mm stud mount tie. It is an Avery Dennison P/N 20153-0. On their website it says that it's Ford # FU5T-14E047-KA. Local dealer can't find the real Ford number. It fits over a stud holding the shock tower brace and holds the battery cable in place.
Thanks

The part number you noted is a real Ford part number.

 

[Cobrakit]

This is the replacement part

JL1Z-7089-B

So yes I have both numbers, but I have been told that the first letter indicates the newness, which implies M is newer than J. And still trying to find out my as built p/n. Most dealers have ni information relative to the driveline clunk issue.

And are you Mitch or a Ford parts person, just wondering, not trying to get pissy ?

 

[Ducatti20]

Good Evening Mustang 7G Members,

My name is Mitch and I have been working for Levittown Ford for a few years and am going to be assisting Benny with forum members on Levittown Ford’s Behalf. Besides for working with the brand I am a huge mustang enthusiast myself! I have owned about 5-6 (coyote's, gt350's and GT500's)so far and will be adding more to that number in the future along with other Ford vehicles! I have experience with a variety of years including the S197,S550, and now S650 platforms. I currently am lucky to own my pride and joy which is a 2014 GT500 which I will attach pictures below of the car and the build! The car has Bolt on’s and is tuned by Lund Racing and made a solid 705 rwhp on 93 octane and I plan on doing a lot more work in the near future! If anyone is ever need of assistance with anything Mustang related or Shelby when it comes to OEM I can defiantly assist you and be as transparent as possible!

Please feel free to PM or add onto our thread if you are in need of any help!

Thank you!
-Mitch C.
LevittownFordParts.com

Welcome and great car!!!

 

[LevittownFordParts]

Benny/Mitch, can you confirm the as built p/n for the A10 output shaft flange for my 24 DH and if there is an updated part? Number I have is ML3Z-7089-A.

ViN 1fa6p8r06r5503514

Good Morning CobraKit!

The correct updated replacing part number would be JL1Z-7089-B! This part is about 3-4 days out through us! If you are intrested please feel free to PM me and i can assist you and supply you with a forum memeber discount code!

Thank you!
-Mitch C.
LevittownFordParts.com

 

[LevittownFordParts]

Hi Mitch,
Need help in getting the P/N for a 10mm stud mount tie. It is an Avery Dennison P/N 20153-0. On their website it says that it's Ford # FU5T-14E047-KA. Local dealer can't find the real Ford number. It fits over a stud holding the shock tower brace and holds the battery cable in place.
Thanks

Good Morning Iceman!

Please PM me with your VIN Number and i will go through the parts catalog to assist you with getting it!

Thank you!
-Mitch C.
LevittownFordParts.com

 

[mrnavy2]

Hello Mitch, Welcome to the Group.

 

[LevittownFordParts]

Welcome and great car!!!

Hi Ducatti20,

Thank you for the warm welcome!

-Mitch C.
LevittownFordParts.com

 

[LevittownFordParts]

Welcome Levitown Ford.

I do need some help and maybe you can find this one out.

Do you know if my Mustang GT Premium with the 401A package and Recaro seats has the wiring inside the door panel to install side mirrors with turning signals? My car doesn't have turning signals because of my Recaro seats and I want to order the side mirrors with turning signals and install them on my car.

Good Morning RaceRedder,

I will need to do a little research on this with a couple different VIN Numbers. If you can PM me your VIN to also go off of that would be helpful!

Thank you!
-Mitch C.
LevittownFordParts.com

 

[RaceRedder]

Good Morning RaceRedder,

I will need to do a little research on this with a couple different VIN Numbers. If you can PM me your VIN to also go off of that would be helpful!

Thank you!
-Mitch C.
LevittownFordParts.com

I just sent you a PM with all the details including part numbers.

Sponsored