Search results

Break in oil change completed. The underside cover screws and push pins all came out in one piece.The factory oil filter is 3/4 inch shorter than Motocraft FL500S. I used 10 quarts of the Full Synthetic 5W30 Motocraft oil. The 1st photo of the dipstick is with 10 quarts of new oil cold. The 2nd...

Installed two 14' long LED light strips on my Wildfire 4 post lift. Had to put the wires, electrical chord and switches in areas that can be permanent and user friendly. Also made an accommodation to plug my battery tender in when it's on the top of the lift. Amazon sells these lights in many...

This is the way my photo of my car will load with my Android phone. Anyone else have this problem ? This issue started 4 days ago.

Years ago on another Forum that is no longer around I had a topic called "Grabbers Shop" for 10 years where I would post off topic stuff that I was doing. 9 years ago I downsized and moved. I had a small home with a 5 car garage built with a 10'-8" high ceiling. It has 2 tandem bays and 1 single...

Put my Mustangs up for in preparation for the Pacific NW winter today. 1. Battery tender 2. Extra air in Tires 3. Clean & Wax 4. Car cover 5. Fill gas tank & add STA-BIL

All went well on this install. Easy Peasy.

Nice quality product by LMR. $139.99 with free shipping. https://lmr.com/item/SVE-2024JP-K/sve-mustang-jack-pad-kit-2024?utm_source=google&utm_medium=cpc&adpos=&scid=scplp&sc_intid=&gad_source=1&gclid=Cj0KCQiArby5BhCDARIsAIJvjIRYku90dxdQmU_XhhQIbfIiaWfug1ZwpoLdnTkL5YqxXhnL3P-n4R4aAnciEALw_wcB

Under my 2024 Mustang GT there are 2 unused plugs wrapped with a heat shield. One on each side of the exhaust pipes below the engine. What option are they for ?

I purchased a Ford Licensed plate frame from Amazon for $22 made out of black polycarbonate material. Made in the USA and has a lifetime warranty. I know not everyone will I like it, but I do. 👌 Au-TOMOTIVE GOLD UV Print Polycarbonate License Plate Frame for Ford Mustang (Black)...

I had PPF installed on the front of my 2024 Mustang GT and the liquid fluid they use got all over the wheels and left waterspots. I removed all 4 wheels and used Meguires Cleaner Wax to remove them. It took a few coats and lots of hand buffing and they are gone. Did the inside of the wheels too...

I'm happy with the way these ZL1 Rock Guards fit and Look. Pleased with the stock "look" profile.

Followed the instructional Video to patch up the holes behind the front tires in the fender well on my new 24 GT. I have some black RTV adhesive sealent on order to put a small bead along the peremeter edges of the patch. I took a bunch of photos of dry fitting the patch with the supplied foam...

Ordered off Amazon for 69 bucks. The photos Show how I installed it.

My brand new 2024 Mustang GT with 400 miles has a bad leak in the CV boot. My local dealer has ordered a complete drivers side assembly today. Should be here in a few days. When I first noticed it I wiped it all off thinking it was sloppy Assembly work. Then took it for a 20 mile drive and put...